Page 5 of 198 results (0.005 seconds)

CVSS: 6.5EPSS: 0%CPEs: 80EXPL: 0

An Improper Check for Unusual or Exceptional Conditions in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS Evolved on PTX10003 Series allows an unauthenticated adjacent attacker to cause an impact to the integrity of the system. When specific transit MPLS packets are received by the PFE, these packets are internally forwarded to the RE. This issue is a prerequisite for CVE-2023-44195. This issue affects Juniper Networks Junos OS Evolved: * All versions prior to 20.4R3-S8-EVO; * 21.1-EVO version 21.1R1-EVO and later; * 21.2-EVO versions prior to 21.2R3-S6-EVO; * 21.3-EVO version 21.3R1-EVO and later; * 21.4-EVO versions prior to 21.4R3-S3-EVO; * 22.1-EVO versions prior to 22.1R3-S4-EVO; * 22.2-EVO versions prior to 22.2R3-S3-EVO; * 22.3-EVO versions prior to 22.3R2-S2-EVO, 22.3R3-EVO; * 22.4-EVO versions prior to 22.4R2-EVO. Una Verificación Inadecuada de Condiciones Inusuales o Excepcionales en Packet Forwarding Engine (pfe) de Juniper Networks Junos OS Evolved en la serie PTX10003 permite que un atacante adyacente no autenticado cause un impacto en la integridad del sistema. Cuando el PFE recibe paquetes MPLS de tránsito específicos, estos paquetes se reenvían internamente al RE. Este problema es un requisito previo para CVE-2023-44195. • https://supportportal.juniper.net/JSA73162 • CWE-754: Improper Check for Unusual or Exceptional Conditions •

CVSS: 8.4EPSS: 0%CPEs: 50EXPL: 0

An Incorrect Default Permissions vulnerability in Juniper Networks Junos OS allows an unauthenticated attacker with local access to the device to create a backdoor with root privileges. The issue is caused by improper directory permissions on a certain system directory, allowing an attacker with access to this directory to create a backdoor with root privileges. This issue affects Juniper Networks Junos OS: * All versions prior to 20.4R3-S5; * 21.1 versions prior to 21.1R3-S4; * 21.2 versions prior to 21.2R3-S4; * 21.3 versions prior to 21.3R3-S3; * 21.4 versions prior to 21.4R3-S1. Una vulnerabilidad de permisos predeterminados incorrectos en Juniper Networks Junos OS permite que un atacante no autenticado con acceso local al dispositivo cree un backdoor con privilegios de root. El problema se debe a permisos de directorio inadecuados en un determinado directorio del sistema, lo que permite a un atacante con acceso a este directorio crear un backdoor con privilegios de root. Este problema afecta a Juniper Networks Junos OS: * Todas las versiones anteriores a 20.4R3-S5; * Versiones 21.1 anteriores a 21.1R3-S4; * Versiones 21.2 anteriores a 21.2R3-S4; * Versiones 21.3 anteriores a 21.3R3-S3; * Versiones 21.4 anteriores a 21.4R3-S1. • https://supportportal.juniper.net/JSA73158 • CWE-276: Incorrect Default Permissions •

CVSS: 5.5EPSS: 0%CPEs: 81EXPL: 0

An Improper Release of Memory Before Removing Last Reference vulnerability in Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows a local, low privileged attacker to cause an FPC crash, leading to Denial of Service (DoS). On all Junos MX Series with MPC1 - MPC9, LC480, LC2101, MX10003, and MX80, when Connectivity-Fault-Management (CFM) is enabled in a VPLS scenario, and a specific LDP related command is run, an FPC will crash and reboot. Continued execution of this specific LDP command can lead to sustained Denial of Service condition. This issue affects: Juniper Networks Junos OS on MX Series: * All versions prior to 20.4R3-S7; * 21.1 versions prior to 21.1R3-S5; * 21.2 versions prior to 21.2R3-S4; * 21.3 versions prior to 21.3R3-S4; * 21.4 versions prior to 21.4R3-S3; * 22.1 versions prior to 22.1R3-S1; * 22.2 versions prior to 22.2R2-S1, 22.2R3; * 22.3 versions prior to 22.3R1-S2, 22.3R2. Una vulnerabilidad de liberación inadecuada de memoria antes de eliminar la última referencia en Packet Forwarding Engine (PFE) de Juniper Networks Junos OS permite que un atacante local con pocos privilegios provoque una falla del FPC, lo que lleva a una Denegación de Servicio (DoS). En todas las series Junos MX con MPC1 - MPC9, LC480, LC2101, MX10003 y MX80, cuando Connectivity-Fault-Management (CFM) está habilitada en un escenario VPLS y se ejecuta un comando relacionado con LDP específico, un FPC fallará y se reiniciará. La ejecución continua de este comando LDP específico puede provocar una condición sostenida de Denegación de Servicio. • https://supportportal.juniper.net/JSA73157 • CWE-401: Missing Release of Memory after Effective Lifetime •

CVSS: 7.5EPSS: 0%CPEs: 86EXPL: 0

An Improper Input Validation vulnerability in the Packet Forwarding Engine of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause memory leak, leading to Denial of Service (DoS). On all Junos OS QFX5000 Series platforms, when pseudo-VTEP (Virtual Tunnel End Point) is configured under EVPN-VXLAN scenario, and specific DHCP packets are transmitted, DMA memory leak is observed. Continuous receipt of these specific DHCP packets will cause memory leak to reach 99% and then cause the protocols to stop working and traffic is impacted, leading to Denial of Service (DoS) condition. A manual reboot of the system recovers from the memory leak. To confirm the memory leak, monitor for "sheaf:possible leak" and "vtep not found" messages in the logs. This issue affects: Juniper Networks Junos OS QFX5000 Series: * All versions prior to 20.4R3-S6; * 21.1 versions prior to 21.1R3-S5; * 21.2 versions prior to 21.2R3-S5; * 21.3 versions prior to 21.3R3-S4; * 21.4 versions prior to 21.4R3-S3; * 22.1 versions prior to 22.1R3-S2; * 22.2 versions prior to 22.2R2-S2, 22.2R3; * 22.3 versions prior to 22.3R2-S1, 22.3R3; * 22.4 versions prior to 22.4R1-S2, 22.4R2. Una vulnerabilidad de validación de entrada incorrecta en Packet Forwarding Engine (PFE) de Juniper Networks Junos OS permite que un atacante basado en red no autenticado cause una pérdida de memoria, lo que lleva a una Denegación de Servicio (DoS). En todas las plataformas de la serie Junos OS QFX5000, cuando se configura pseudo-VTEP (Virtual Tunnel End Point) en el escenario EVPN-VXLAN y se transmiten paquetes DHCP específicos, se observa una pérdida de memoria DMA. • https://supportportal.juniper.net/JSA73156 • CWE-20: Improper Input Validation CWE-401: Missing Release of Memory after Effective Lifetime •

CVSS: 7.5EPSS: 0%CPEs: 92EXPL: 0

An Allocation of Resources Without Limits or Throttling vulnerability in Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause Denial of Service (DoS). On all Junos OS QFX5000 Series and EX4000 Series platforms, when a high number of VLANs are configured, a specific DHCP packet will cause PFE hogging which will lead to dropping of socket connections. This issue affects: Juniper Networks Junos OS on QFX5000 Series and EX4000 Series * 21.1 versions prior to 21.1R3-S5; * 21.2 versions prior to 21.2R3-S5; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S4; * 22.1 versions prior to 22.1R3-S3; * 22.2 versions prior to 22.2R3-S1; * 22.3 versions prior to 22.3R2-S2, 22.3R3; * 22.4 versions prior to 22.4R2. This issue does not affect Juniper Networks Junos OS versions prior to 21.1R1 Una vulnerabilidad de asignación de recursos sin límites ni limitación en Juniper Networks Junos OS permite que un atacante no autenticado basado en la red provoque una Denegación de Servicio (DoS). En todas las plataformas Junos OS QFX5000 Series y EX4000 Series, cuando se configura una gran cantidad de VLAN, un paquete DHCP específico provocará un acaparamiento de PFE, lo que provocará la caída de las conexiones del socket. Este problema afecta a: Juniper Networks Junos OS en las series QFX5000 y EX4000 * versiones 21.1 anteriores a 21.1R3-S5; * Versiones 21.2 anteriores a 21.2R3-S5; * Versiones 21.3 anteriores a 21.3R3-S5; * Versiones 21.4 anteriores a 21.4R3-S4; * Versiones 22.1 anteriores a 22.1R3-S3; * Versiones 22.2 anteriores a 22.2R3-S1; * Versiones 22.3 anteriores a 22.3R2-S2, 22.3R3; * Versiones 22.4 anteriores a 22.4R2. Este problema no afecta a las versiones de Juniper Networks Junos OS anteriores a 21.1R1. • https://supportportal.juniper.net/JSA73155 • CWE-770: Allocation of Resources Without Limits or Throttling •