CVSS: -EPSS: 0%CPEs: 3EXPL: 0CVE-2024-27057 – ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend
https://notcve.org/view.php?id=CVE-2024-27057
In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend When the system is suspended while audio is active, the sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during suspend the DSP is turned off, streams will be re-started after resume. If the firmware crashes during while audio is running (or when we reset the stream before suspend) then the sof_ipc4_set_multi_pipeline_state() will fail with IPC error and the state change is interrupted. This will cause misalignment between the kernel and firmware state on next DSP boot resulting errors returned by firmware for IPC messages, eventually failing the audio resume. On stream close the errors are ignored so the kernel state will be corrected on the next DSP boot, so the second boot after the DSP panic. If sof_ipc4_trigger_pipelines() is called from sof_ipc4_pcm_hw_free() then state parameter is SOF_IPC4_PIPE_RESET and only in this case. Treat a forced pipeline reset similarly to how we treat a pcm_free by ignoring error on state sending to allow the kernel's state to be consistent with the state the firmware will have after the next boot. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: ASoC: SOF: ipc4-pcm: workaround para firmware bloqueado en suspensión del sistema Cuando el sistema se suspende mientras el audio está activo, se invoca sof_ipc4_pcm_hw_free() para restablecer las canalizaciones desde durante la suspensión el DSP está apagado, las transmisiones se reiniciarán después de reanudarse. Si el firmware falla mientras se ejecuta el audio (o cuando reiniciamos la transmisión antes de suspenderla), entonces sof_ipc4_set_multi_pipeline_state() fallará con un error de IPC y se interrumpirá el cambio de estado. Esto provocará una desalineación entre el estado del kernel y del firmware en el siguiente arranque del DSP, lo que provocará errores devueltos por el firmware para los mensajes IPC, lo que eventualmente provocará un error en la reanudación del audio. Al cerrar la transmisión, los errores se ignoran, por lo que el estado del kernel se corregirá en el siguiente inicio del DSP, es decir, en el segundo inicio después del pánico del DSP. • https://git.kernel.org/stable/c/3cac6eebea9b4bc5f041e157e45c76e212ad6759 https://git.kernel.org/stable/c/d153e8b154f9746ac969c85a4e6474760453647c https://git.kernel.org/stable/c/c40aad7c81e5fba34b70123ed7ce3397fa62a4d2 •
CVSS: 5.5EPSS: 0%CPEs: 2EXPL: 0CVE-2024-27056 – wifi: iwlwifi: mvm: ensure offloading TID queue exists
https://notcve.org/view.php?id=CVE-2024-27056
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: ensure offloading TID queue exists The resume code path assumes that the TX queue for the offloading TID has been configured. At resume time it then tries to sync the write pointer as it may have been updated by the firmware. In the unusual event that no packets have been send on TID 0, the queue will not have been allocated and this causes a crash. Fix this by ensuring the queue exist at suspend time. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: wifi: iwlwifi: mvm: asegúrese de que exista la cola de descarga TID La ruta del código de reanudación supone que se ha configurado la cola de TX para la descarga de TID. En el momento de la reanudación, intenta sincronizar el puntero de escritura, ya que es posible que el firmware lo haya actualizado. • https://git.kernel.org/stable/c/ed35a509390ef4011ea2226da5dd6f62b73873b5 https://git.kernel.org/stable/c/78f65fbf421a61894c14a1b91fe2fb4437b3fe5f https://access.redhat.com/security/cve/CVE-2024-27056 https://bugzilla.redhat.com/show_bug.cgi?id=2278409 •
CVSS: -EPSS: 0%CPEs: 2EXPL: 0CVE-2024-27055 – workqueue: Don't call cpumask_test_cpu() with -1 CPU in wq_update_node_max_active()
https://notcve.org/view.php?id=CVE-2024-27055
In the Linux kernel, the following vulnerability has been resolved: workqueue: Don't call cpumask_test_cpu() with -1 CPU in wq_update_node_max_active() For wq_update_node_max_active(), @off_cpu of -1 indicates that no CPU is going down. The function was incorrectly calling cpumask_test_cpu() with -1 CPU leading to oopses like the following on some archs: Unable to handle kernel paging request at virtual address ffff0002100296e0 .. pc : wq_update_node_max_active+0x50/0x1fc lr : wq_update_node_max_active+0x1f0/0x1fc ... Call trace: wq_update_node_max_active+0x50/0x1fc apply_wqattrs_commit+0xf0/0x114 apply_workqueue_attrs_locked+0x58/0xa0 alloc_workqueue+0x5ac/0x774 workqueue_init_early+0x460/0x540 start_kernel+0x258/0x684 __primary_switched+0xb8/0xc0 Code: 9100a273 35000d01 53067f00 d0016dc1 (f8607a60) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- Fix it. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: cola de trabajo: no llame a cpumask_test_cpu() con -1 CPU en wq_update_node_max_active() Para wq_update_node_max_active(), @off_cpu de -1 indica que no hay ninguna CPU fallando. • https://git.kernel.org/stable/c/5a70baec2294e8a7d0fcc4558741c23e752dad5c https://git.kernel.org/stable/c/843288afd3cc6f3342659c6cf81fc47684d25563 https://git.kernel.org/stable/c/a75ac2693d734d20724f0e10e039ca85f1fcfc4e https://git.kernel.org/stable/c/adc646d2126988a64234502f579e4bc2b080d7cf https://git.kernel.org/stable/c/7df62b8cca38aa452b508b477b16544cba615084 https://git.kernel.org/stable/c/38c19c44cc05ec1e84d2e31a9a289b83b6c7ec85 https://git.kernel.org/stable/c/9fc557d489f8163c1aabcb89114b8eba960f4097 https://git.kernel.org/stable/c/15930da42f8981dc42c19038042947b47 •
CVSS: -EPSS: 0%CPEs: 6EXPL: 0CVE-2024-27054 – s390/dasd: fix double module refcount decrement
https://notcve.org/view.php?id=CVE-2024-27054
In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix double module refcount decrement Once the discipline is associated with the device, deleting the device takes care of decrementing the module's refcount. Doing it manually on this error path causes refcount to artificially decrease on each error while it should just stay the same. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: s390/dasd: corrige la disminución del doble recuento del módulo Una vez que la disciplina está asociada con el dispositivo, eliminar el dispositivo se encarga de disminuir el recuento del módulo. Hacerlo manualmente en esta ruta de error hace que el recuento disminuya artificialmente en cada error, mientras que debería permanecer igual. • https://git.kernel.org/stable/c/c020d722b110a44c613ef71e657e6dd4116e09d9 https://git.kernel.org/stable/c/edbdb0d94143db46edd373cc93e433832d29fe19 https://git.kernel.org/stable/c/ad999aa18103fa038787b6a8a55020abcf34df1a https://git.kernel.org/stable/c/ec09bcab32fc4765e0cc97e1b72cdd067135f37e https://git.kernel.org/stable/c/fa18aa507ea71d8914b6acb2c94db311c757c650 https://git.kernel.org/stable/c/ebc5a3bd79e54f98c885c26f0862a27a02c487c5 https://git.kernel.org/stable/c/c3116e62ddeff79cae342147753ce596f01fcf06 •
CVSS: 9.1EPSS: 0%CPEs: 8EXPL: 0CVE-2024-27053 – wifi: wilc1000: fix RCU usage in connect path
https://notcve.org/view.php?id=CVE-2024-27053
In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix RCU usage in connect path With lockdep enabled, calls to the connect function from cfg802.11 layer lead to the following warning: ============================= WARNING: suspicious RCU usage 6.7.0-rc1-wt+ #333 Not tainted ----------------------------- drivers/net/wireless/microchip/wilc1000/hif.c:386 suspicious rcu_dereference_check() usage! [...] stack backtrace: CPU: 0 PID: 100 Comm: wpa_supplicant Not tainted 6.7.0-rc1-wt+ #333 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from wilc_parse_join_bss_param+0x7dc/0x7f4 wilc_parse_join_bss_param from connect+0x2c4/0x648 connect from cfg80211_connect+0x30c/0xb74 cfg80211_connect from nl80211_connect+0x860/0xa94 nl80211_connect from genl_rcv_msg+0x3fc/0x59c genl_rcv_msg from netlink_rcv_skb+0xd0/0x1f8 netlink_rcv_skb from genl_rcv+0x2c/0x3c genl_rcv from netlink_unicast+0x3b0/0x550 netlink_unicast from netlink_sendmsg+0x368/0x688 netlink_sendmsg from ____sys_sendmsg+0x190/0x430 ____sys_sendmsg from ___sys_sendmsg+0x110/0x158 ___sys_sendmsg from sys_sendmsg+0xe8/0x150 sys_sendmsg from ret_fast_syscall+0x0/0x1c This warning is emitted because in the connect path, when trying to parse target BSS parameters, we dereference a RCU pointer whithout being in RCU critical section. Fix RCU dereference usage by moving it to a RCU read critical section. To avoid wrapping the whole wilc_parse_join_bss_param under the critical section, just use the critical section to copy ies data En el kernel de Linux, se resolvió la siguiente vulnerabilidad: wifi: wilc1000: corrige el uso de RCU en la ruta de conexión Con lockdep habilitado, las llamadas a la función de conexión desde la capa cfg802.11 generan la siguiente advertencia: ======== ====================== ADVERTENCIA: uso sospechoso de RCU 6.7.0-rc1-wt+ #333 No contaminado ------------- ---------------- drivers/net/wireless/microchip/wilc1000/hif.c:386 ¡uso sospechoso de rcu_dereference_check()! [...] pila backtrace: CPU: 0 PID: 100 Comm: wpa_supplicant No está contaminado 6.7.0-rc1-wt+ #333 Nombre de hardware: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from wilc_parse_join_bss_para m +0x7dc/0x7f4 wilc_parse_join_bss_param desde connect+0x2c4/0x648 conectar desde cfg80211_connect+0x30c/0xb74 cfg80211_connect desde nl80211_connect+0x860/0xa94 nl80211_connect desde genl_rcv_msg+0x3fc /0x59c genl_rcv_msg de netlink_rcv_skb+0xd0/0x1f8 netlink_rcv_skb de genl_rcv+0x2c/0x3c genl_rcv de netlink_unicast+ 0x3b0/0x550 netlink_unicast de netlink_sendmsg+0x368/0x688 netlink_sendmsg de ____sys_sendmsg+0x190/0x430 ____sys_sendmsg de ___sys_sendmsg+0x110/0x158 ___sys_sendmsg de sys_sendmsg +0xe8/0x150 sys_sendmsg de ret_fast_syscall+0x0/0x1c Esta advertencia se emite porque en la ruta de conexión, al intentar Para analizar los parámetros BSS de destino, eliminamos la referencia a un puntero de RCU sin estar en la sección crítica de RCU. Corrija el uso de desreferenciación de RCU moviéndolo a una sección crítica de lectura de RCU. • https://git.kernel.org/stable/c/c460495ee072fc01a9b1e8d72c179510418cafac https://git.kernel.org/stable/c/e556006de4ea93abe2b46cba202a2556c544b8b2 https://git.kernel.org/stable/c/b4bbf38c350acb6500cbe667b1e2e68f896e4b38 https://git.kernel.org/stable/c/d80fc436751cfa6b02a8eda74eb6cce7dadfe5a2 https://git.kernel.org/stable/c/745003b5917b610352f52fe0d11ef658d6471ec2 https://git.kernel.org/stable/c/4bfd20d5f5c62b5495d6c0016ee6933bd3add7ce https://git.kernel.org/stable/c/5800ec78775c0cd646f71eb9bf8402fb794807de https://git.kernel.org/stable/c/dd50d3ead6e3707bb0a5df7cc832730c9 • CWE-476: NULL Pointer Dereference •