CVSS: 7.5EPSS: 0%CPEs: 22EXPL: 0CVE-2020-1638 – Junos OS & Junos OS Evolved: A specific IPv4 packet can lead to FPC restart.
https://notcve.org/view.php?id=CVE-2020-1638
The FPC (Flexible PIC Concentrator) of Juniper Networks Junos OS and Junos OS Evolved may restart after processing a specific IPv4 packet. Only packets destined to the device itself, successfully reaching the RE through existing edge and control plane filtering, will be able to cause the FPC restart. When this issue occurs, all traffic via the FPC will be dropped. By continuously sending this specific IPv4 packet, an attacker can repeatedly crash the FPC, causing an extended Denial of Service (DoS) condition. This issue can only occur when processing a specific IPv4 packet. • https://kb.juniper.net/JSA11019 • CWE-467: Use of sizeof() on a Pointer Type •
CVSS: 7.2EPSS: 0%CPEs: 142EXPL: 0CVE-2020-1637 – Junos OS: SRX Series: Unified Access Control (UAC) bypass vulnerability
https://notcve.org/view.php?id=CVE-2020-1637
A vulnerability in Juniper Networks SRX Series device configured as a Junos OS Enforcer device may allow a user to access network resources that are not permitted by a UAC policy. This issue might occur when the IP address range configured in the Infranet Controller (IC) is configured as an IP address range instead of an IP address/netmask. See the Workaround section for more detail. The Junos OS Enforcer CLI settings are disabled by default. This issue affects Juniper Networks Junos OS on SRX Series: 12.3X48 versions prior to 12.3X48-D100; 15.1X49 versions prior to 15.1X49-D210; 17.3 versions prior to 17.3R2-S5, 17.3R3-S8; 17.4 versions prior to 17.4R2-S9, 17.4R3-S1; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R3-S2; 18.4 versions prior to 18.4R1-S6, 18.4R2-S4, 18.4R3-S1; 19.1 versions prior to 19.1R1-S4, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S3, 19.2R2; 19.3 versions prior to 19.3R2-S1, 19.3R3; 19.4 versions prior to 19.4R1-S1, 19.4R2. • https://kb.juniper.net/JSA11018 • CWE-287: Improper Authentication CWE-288: Authentication Bypass Using an Alternate Path or Channel •
CVSS: 5.3EPSS: 0%CPEs: 222EXPL: 0CVE-2020-1628 – Junos OS: EX4300: Traffic from the network internal to the device (128.0.0.0) may be forwarded to egress interfaces
https://notcve.org/view.php?id=CVE-2020-1628
Juniper Networks Junos OS uses the 128.0.0.0/2 subnet for internal communications between the RE and PFEs. It was discovered that packets utilizing these IP addresses may egress an EX4300 switch, leaking configuration information such as heartbeats, kernel versions, etc. out to the Internet, leading to an information exposure vulnerability. This issue affects Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D53 on EX4300; 15.1 versions prior to 15.1R7-S6 on EX4300; 15.1X49 versions prior to 15.1X49-D200, 15.1X49-D210 on EX4300; 16.1 versions prior to 16.1R7-S7 on EX4300; 17.1 versions prior to 17.1R2-S11, 17.1R3-S2 on EX4300; 17.2 versions prior to 17.2R3-S3 on EX4300; 17.3 versions prior to 17.3R2-S5, 17.3R3-S7 on EX4300; 17.4 versions prior to 17.4R2-S9, 17.4R3 on EX4300; 18.1 versions prior to 18.1R3-S8 on EX4300; 18.2 versions prior to 18.2R3-S2 on EX4300; 18.3 versions prior to 18.3R2-S3, 18.3R3, 18.3R3-S1 on EX4300; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3 on EX4300; 19.1 versions prior to 19.1R1-S4, 19.1R2 on EX4300; 19.2 versions prior to 19.2R1-S4, 19.2R2 on EX4300; 19.3 versions prior to 19.3R1-S1, 19.3R2 on EX4300. Juniper Networks Junos OS usa la subred 128.0.0.0/2 para las comunicaciones internas entre RE y PFE. Se detectó que los paquetes que utilizan estas direcciones IP pueden salir de un switch EX4300 y filtrar información de configuración tal como heartbeats, versiones del kernel, etc. hacia la Internet, conllevando una vulnerabilidad de exposición de información. • https://kb.juniper.net/JSA11008 • CWE-200: Exposure of Sensitive Information to an Unauthorized Actor •
CVSS: 10.0EPSS: 0%CPEs: 123EXPL: 0CVE-2020-1615 – Junos OS: vMX: Default credentials supplied in vMX configuration
https://notcve.org/view.php?id=CVE-2020-1615
The factory configuration for vMX installations, as shipped, includes default credentials for the root account. Without proper modification of these default credentials by the administrator, an attacker could exploit these credentials and access the vMX instance without authorization. This issue affects Juniper Networks Junos OS: 17.1 versions prior to 17.1R2-S11, 17.1R3-S2 on vMX; 17.2 versions prior to 17.2R3-S3 on vMX; 17.3 versions prior to 17.3R2-S5, 17.3R3-S7 on vMX; 17.4 versions prior to 17.4R2-S9, 17.4R3 on vMX; 18.1 versions prior to 18.1R3-S9 on vMX; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3 on vMX; 18.2X75 versions prior to 18.2X75-D420, 18.2X75-D60 on vMX; 18.3 versions prior to 18.3R1-S7, 18.3R2-S3, 18.3R3-S1 on vMX; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3 on vMX; 19.1 versions prior to 19.1R1-S4, 19.1R2, 19.1R3 on vMX; 19.2 versions prior to 19.2R1-S3, 19.2R2 on vMX; 19.3 versions prior to 19.3R1-S1, 19.3R2 on vMX. La configuración de fábrica para instalaciones de vMX, tal como es entregado, incluye credenciales predeterminadas para la cuenta root. Sin una modificación apropiada de estas credenciales predeterminadas por el administrador, un atacante podría explotar estas credenciales y acceder a la instancia de vMX sin autorización. • https://kb.juniper.net/JSA10998 • CWE-798: Use of Hard-coded Credentials •
CVSS: 10.0EPSS: 83%CPEs: 361EXPL: 0CVE-2020-10188 – telnet-server: no bounds checks in nextitem() function allows to remotely execute arbitrary code
https://notcve.org/view.php?id=CVE-2020-10188
utility.c in telnetd in netkit telnet through 0.17 allows remote attackers to execute arbitrary code via short writes or urgent data, because of a buffer overflow involving the netclear and nextitem functions. El archivo utility.c en telnetd en netkit telnet versiones hasta 0.17, permite a atacantes remotos ejecutar código arbitrario por medio de escrituras cortas o datos urgentes, debido a un desbordamiento del búfer que involucra a las funciones netclear y nextitem. A vulnerability was found where incorrect bounds checks in the telnet server’s (telnetd) handling of short writes and urgent data, could lead to information disclosure and corruption of heap data. An unauthenticated remote attacker could exploit these bugs by sending specially crafted telnet packets to achieve arbitrary code execution in the telnet server. • https://appgateresearch.blogspot.com/2020/02/bravestarr-fedora-31-netkit-telnetd_28.html https://github.com/krb5/krb5-appl/blob/d00cd671dfe945791b33d4f1f6a5c57ae1667ef8/telnet/telnetd/utility.c#L205-L216 https://lists.debian.org/debian-lts-announce/2020/05/msg00012.html https://lists.debian.org/debian-lts-announce/2020/08/msg00038.html https://lists.fedoraproject.org/archives/list/package-announce%40lists.fedoraproject.org/message/7FMTRRQTYKWZD2GMXX3GLZV46OLPCLVK https://lists.fedoraproject.org/archives/list/package-announce%40l • CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CWE-120: Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') •