CVSS: -EPSS: 0%CPEs: 9EXPL: 0CVE-2024-47713 – wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop()
https://notcve.org/view.php?id=CVE-2024-47713
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop() Since '__dev_queue_xmit()' should be called with interrupts enabled, the following backtrace: ieee80211_do_stop() ... spin_lock_irqsave(&local->queue_stop_reason_lock, flags) ... ieee80211_free_txskb() ieee80211_report_used_skb() ieee80211_report_ack_skb() cfg80211_mgmt_tx_status_ext() nl80211_frame_tx_status() genlmsg_multicast_netns() genlmsg_multicast_netns_filtered() nlmsg_multicast_filtered() netlink_broadcast_filtered() do_one_broadcast() netlink_broadcast_deliver() __netlink_sendskb() netlink_deliver_tap() __netlink_deliver_tap_skb() dev_queue_xmit() __dev_queue_xmit() ; with IRQS disabled ... spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags) issues the warning (as reported by syzbot reproducer): WARNING: CPU: 2 PID: 5128 at kernel/softirq.c:362 __local_bh_enable_ip+0xc3/0x120 Fix this by implementing a two-phase skb reclamation in 'ieee80211_do_stop()', where actual work is performed outside of a section with interrupts disabled. • https://git.kernel.org/stable/c/5061b0c2b9066de426fbc63f1278d2210e789412 https://git.kernel.org/stable/c/07eb0bd7b0a8abed9d45e0f567c9af1dc83e5268 https://git.kernel.org/stable/c/04f75f5bae33349283d6886901d9acd2f110c024 https://git.kernel.org/stable/c/f232916fab67ca1c3425926df4a866e59ff26908 https://git.kernel.org/stable/c/acb53a716e492a02479345157c43f21edc8bc64b https://git.kernel.org/stable/c/db5ca4b42ccfa42d2af7b335ff12578e57775c02 https://git.kernel.org/stable/c/058c9026ad79dc98572442fd4c7e9a36aba6f596 https://git.kernel.org/stable/c/eab272972cffff9cd973b8e4055a8e81c •
CVSS: -EPSS: 0%CPEs: 9EXPL: 0CVE-2024-47709 – can: bcm: Clear bo->bcm_proc_read after remove_proc_entry().
https://notcve.org/view.php?id=CVE-2024-47709
In the Linux kernel, the following vulnerability has been resolved: can: bcm: Clear bo->bcm_proc_read after remove_proc_entry(). syzbot reported a warning in bcm_release(). [0] The blamed change fixed another warning that is triggered when connect() is issued again for a socket whose connect()ed device has been unregistered. However, if the socket is just close()d without the 2nd connect(), the remaining bo->bcm_proc_read triggers unnecessary remove_proc_entry() in bcm_release(). Let's clear bo->bcm_proc_read after remove_proc_entry() in bcm_notify(). [0] name '4986' WARNING: CPU: 0 PID: 5234 at fs/proc/generic.c:711 remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711 Modules linked in: CPU: 0 UID: 0 PID: 5234 Comm: syz-executor606 Not tainted 6.11.0-rc5-syzkaller-00178-g5517ae241919 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711 Code: ff eb 05 e8 cb 1e 5e ff 48 8b 5c 24 10 48 c7 c7 e0 f7 aa 8e e8 2a 38 8e 09 90 48 c7 c7 60 3a 1b 8c 48 89 de e8 da 42 20 ff 90 <0f> 0b 90 90 48 8b 44 24 18 48 c7 44 24 40 0e 36 e0 45 49 c7 04 07 RSP: 0018:ffffc9000345fa20 EFLAGS: 00010246 RAX: 2a2d0aee2eb64600 RBX: ffff888032f1f548 RCX: ffff888029431e00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000345fb08 R08: ffffffff8155b2f2 R09: 1ffff1101710519a R10: dffffc0000000000 R11: ffffed101710519b R12: ffff888011d38640 R13: 0000000000000004 R14: 0000000000000000 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcfb52722f0 CR3: 000000000e734000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bcm_release+0x250/0x880 net/can/bcm.c:1578 __sock_release net/socket.c:659 [inline] sock_close+0xbc/0x240 net/socket.c:1421 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:228 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:882 do_group_exit+0x207/0x2c0 kernel/exit.c:1031 __do_sys_exit_group kernel/exit.c:1042 [inline] __se_sys_exit_group kernel/exit.c:1040 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1040 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcfb51ee969 Code: Unable to access opcode bytes at 0x7fcfb51ee93f. RSP: 002b:00007ffce0109ca8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fcfb51ee969 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001 RBP: 00007fcfb526f3b0 R08: ffffffffffffffb8 R09: 0000555500000000 R10: 0000555500000000 R11: 0000000000000246 R12: 00007fcfb526f3b0 R13: 0000000000000000 R14: 00007fcfb5271ee0 R15: 00007fcfb51bf160 </TASK> • https://git.kernel.org/stable/c/5c680022c4e28ba18ea500f3e29f0428271afa92 https://git.kernel.org/stable/c/33ed4ba73caae39f34ab874ba79138badc2c65dd https://git.kernel.org/stable/c/aec92dbebdbec7567d9f56d7c9296a572b8fd849 https://git.kernel.org/stable/c/10bfacbd5e8d821011d857bee73310457c9c989a https://git.kernel.org/stable/c/3b39dc2901aa7a679a5ca981a3de9f8d5658afe8 https://git.kernel.org/stable/c/4377b79323df62eb5d310354f19b4d130ff58d50 https://git.kernel.org/stable/c/abb0a615569ec008e8a93d9f3ab2d5b418ea94d4 https://git.kernel.org/stable/c/76fe372ccb81b0c89b6cd2fec26e2f38c •
CVSS: -EPSS: 0%CPEs: 6EXPL: 0CVE-2024-47707 – ipv6: avoid possible NULL deref in rt6_uncached_list_flush_dev()
https://notcve.org/view.php?id=CVE-2024-47707
In the Linux kernel, the following vulnerability has been resolved: ipv6: avoid possible NULL deref in rt6_uncached_list_flush_dev() Blamed commit accidentally removed a check for rt->rt6i_idev being NULL, as spotted by syzbot: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 10998 Comm: syz-executor Not tainted 6.11.0-rc6-syzkaller-00208-g625403177711 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:rt6_uncached_list_flush_dev net/ipv6/route.c:177 [inline] RIP: 0010:rt6_disable_ip+0x33e/0x7e0 net/ipv6/route.c:4914 Code: 41 80 3c 04 00 74 0a e8 90 d0 9b f7 48 8b 7c 24 08 48 8b 07 48 89 44 24 10 4c 89 f0 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 4c 89 f7 e8 64 d0 9b f7 48 8b 44 24 18 49 39 06 RSP: 0018:ffffc900047374e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff1100fdf8f33 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88807efc78c0 RBP: ffffc900047375d0 R08: 0000000000000003 R09: fffff520008e6e8c R10: dffffc0000000000 R11: fffff520008e6e8c R12: 1ffff1100fdf8f18 R13: ffff88807efc7998 R14: 0000000000000000 R15: ffff88807efc7930 FS: 0000000000000000(0000) GS:ffff8880b8900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002a80 CR3: 0000000022f62000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> addrconf_ifdown+0x15d/0x1bd0 net/ipv6/addrconf.c:3856 addrconf_notify+0x3cb/0x1020 notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93 call_netdevice_notifiers_extack net/core/dev.c:2032 [inline] call_netdevice_notifiers net/core/dev.c:2046 [inline] unregister_netdevice_many_notify+0xd81/0x1c40 net/core/dev.c:11352 unregister_netdevice_many net/core/dev.c:11414 [inline] unregister_netdevice_queue+0x303/0x370 net/core/dev.c:11289 unregister_netdevice include/linux/netdevice.h:3129 [inline] __tun_detach+0x6b9/0x1600 drivers/net/tun.c:685 tun_detach drivers/net/tun.c:701 [inline] tun_chr_close+0x108/0x1b0 drivers/net/tun.c:3510 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:228 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:882 do_group_exit+0x207/0x2c0 kernel/exit.c:1031 __do_sys_exit_group kernel/exit.c:1042 [inline] __se_sys_exit_group kernel/exit.c:1040 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1040 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f1acc77def9 Code: Unable to access opcode bytes at 0x7f1acc77decf. RSP: 002b:00007ffeb26fa738 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1acc77def9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000043 RBP: 00007f1acc7dd508 R08: 00007ffeb26f84d7 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000003 R14: 00000000ffffffff R15: 00007ffeb26fa8e0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:rt6_uncached_list_flush_dev net/ipv6/route.c:177 [inline] RIP: 0010:rt6_disable_ip+0x33e/0x7e0 net/ipv6/route.c:4914 Code: 41 80 3c 04 00 74 0a e8 90 d0 9b f7 48 8b 7c 24 08 48 8b 07 48 89 44 24 10 4c 89 f0 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 4c 89 f7 e8 64 d0 9b f7 48 8b 44 24 18 49 39 06 RSP: 0018:ffffc900047374e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff1100fdf8f33 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88807efc78c0 R ---truncated--- • https://git.kernel.org/stable/c/e332bc67cf5e5e5b71a1aec9750d0791aac65183 https://git.kernel.org/stable/c/58d772c203ee57c45620730198bc2d9ded7a1464 https://git.kernel.org/stable/c/f2bd9635543ca41533b870f420872819f8331823 https://git.kernel.org/stable/c/0ceb2f2b5c813f932d6e60d3feec5e7e713da783 https://git.kernel.org/stable/c/9a0ddc73be37d19dff1ba08290af34e707d18e50 https://git.kernel.org/stable/c/08409e401622e2896b4313be9f781bde8a2a6a53 https://git.kernel.org/stable/c/04ccecfa959d3b9ae7348780d8e379c6486176ac •
CVSS: -EPSS: 0%CPEs: 9EXPL: 0CVE-2024-47706 – block, bfq: fix possible UAF for bfqq->bic with merge chain
https://notcve.org/view.php?id=CVE-2024-47706
In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix possible UAF for bfqq->bic with merge chain 1) initial state, three tasks: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | Λ | Λ | Λ | | | | | | V | V | V | bfqq1 bfqq2 bfqq3 process ref: 1 1 1 2) bfqq1 merged to bfqq2: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | | | Λ \--------------\| | | V V | bfqq1--------->bfqq2 bfqq3 process ref: 0 2 1 3) bfqq2 merged to bfqq3: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) here -> Λ | | \--------------\ \-------------\| V V bfqq1--------->bfqq2---------->bfqq3 process ref: 0 1 3 In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then get bfqq3 through merge chain, and finially handle IO by bfqq3. Howerver, current code will think bfqq2 is owned by BIC1, like initial state, and set bfqq2->bic to BIC1. bfq_insert_request -> by Process 1 bfqq = bfq_init_rq(rq) bfqq = bfq_get_bfqq_handle_split bfqq = bic_to_bfqq -> get bfqq2 from BIC1 bfqq->ref++ rq->elv.priv[0] = bic rq->elv.priv[1] = bfqq if (bfqq_process_refs(bfqq) == 1) bfqq->bic = bic -> record BIC1 to bfqq2 __bfq_insert_request new_bfqq = bfq_setup_cooperator -> get bfqq3 from bfqq2->new_bfqq bfqq_request_freed(bfqq) new_bfqq->ref++ rq->elv.priv[1] = new_bfqq -> handle IO by bfqq3 Fix the problem by checking bfqq is from merge chain fist. And this might fix a following problem reported by our syzkaller(unreproducible): ================================================================== BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595 CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_requeue_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0x10d/0x610 mm/kasan/report.c:475 kasan_report+0x8e/0xc0 mm/kasan/report.c:588 bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757 bfq_init_rq block/bfq-iosched.c:6876 [inline] bfq_insert_request block/bfq-iosched.c:6254 [inline] bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304 blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593 blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 </TASK> Allocated by task 20776: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3458 [inline] kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503 ioc_create_icq block/blk-ioc.c:370 [inline] ---truncated--- • https://git.kernel.org/stable/c/36eca894832351feed9072d0f97eb06fc9482ca4 https://git.kernel.org/stable/c/a9bdd5b36887d2bacb8bc777fd18317c99fc2587 https://git.kernel.org/stable/c/bc2140534b2aae752e4f7cb4489642dbb5ec4777 https://git.kernel.org/stable/c/e1277ae780cca4e69ef5468d4582dfd48f0b8320 https://git.kernel.org/stable/c/8aa9de02a4be2e7006e636816ce19b0d667ceaa3 https://git.kernel.org/stable/c/ddbdaad123254fb53e32480cb74a486a6868b1e0 https://git.kernel.org/stable/c/7faed2896d78e48ec96229e73b30b0af6c00a9aa https://git.kernel.org/stable/c/880692ee233ba63808182705b33334034 •
CVSS: -EPSS: 0%CPEs: 4EXPL: 0CVE-2024-47704 – drm/amd/display: Check link_res->hpo_dp_link_enc before using it
https://notcve.org/view.php?id=CVE-2024-47704
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check link_res->hpo_dp_link_enc before using it [WHAT & HOW] Functions dp_enable_link_phy and dp_disable_link_phy can pass link_res without initializing hpo_dp_link_enc and it is necessary to check for null before dereferencing. This fixes 2 FORWARD_NULL issues reported by Coverity. • https://git.kernel.org/stable/c/be2ca7a2c1561390d28bf2f92654d819659ba510 https://git.kernel.org/stable/c/530e29452b955c30cf2102fa4d07420dc6e0c953 https://git.kernel.org/stable/c/0508a4e95ac1aefd851ceb97ea050d8abb93262c https://git.kernel.org/stable/c/0beca868cde8742240cd0038141c30482d2b7eb8 •