CVSS: -EPSS: 0%CPEs: 2EXPL: 0CVE-2024-46870 – drm/amd/display: Disable DMCUB timeout for DCN35
https://notcve.org/view.php?id=CVE-2024-46870
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Disable DMCUB timeout for DCN35 [Why] DMCUB can intermittently take longer than expected to process commands. Old ASIC policy was to continue while logging a diagnostic error - which works fine for ASIC without IPS, but with IPS this could lead to a race condition where we attempt to access DCN state while it's inaccessible, leading to a system hang when the NIU port is not disabled or register accesses that timeout and the display configuration in an undefined state. [How] We need to investigate why these accesses take longer than expected, but for now we should disable the timeout on DCN35 to avoid this race condition. Since the waits happen only at lower interrupt levels the risk of taking too long at higher IRQ and causing a system watchdog timeout are minimal. • https://git.kernel.org/stable/c/31c254c9cd4b122a10db297124f867107a696d83 https://git.kernel.org/stable/c/7c70e60fbf4bff1123f0e8d5cb1ae71df6164d7f •
CVSS: -EPSS: 0%CPEs: 3EXPL: 0CVE-2024-46861 – usbnet: ipheth: do not stop RX on failing RX callback
https://notcve.org/view.php?id=CVE-2024-46861
In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: do not stop RX on failing RX callback RX callbacks can fail for multiple reasons: * Payload too short * Payload formatted incorrecly (e.g. bad NCM framing) * Lack of memory None of these should cause the driver to seize up. Make such failures non-critical and continue processing further incoming URBs. • https://git.kernel.org/stable/c/4d1cfa3afb8627435744ecdc6d8b58bc72ee0f4c https://git.kernel.org/stable/c/08ca800b0cd56d5e26722f68b18bbbf6840bf44b https://git.kernel.org/stable/c/74efed51e0a4d62f998f806c307778b47fc73395 •
CVSS: -EPSS: 0%CPEs: 3EXPL: 0CVE-2024-46860 – wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change
https://notcve.org/view.php?id=CVE-2024-46860
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change When disabling wifi mt7921_ipv6_addr_change() is called as a notifier. At this point mvif->phy is already NULL so we cannot use it here. • https://git.kernel.org/stable/c/4bfee9346d8c17d928ef6da2b8bffab88fa2a553 https://git.kernel.org/stable/c/8d92bafd4c67efb692f722d73a07412b5f88c6d6 https://git.kernel.org/stable/c/479ffee68d59c599f8aed8fa2dcc8e13e7bd13c3 •
CVSS: -EPSS: 0%CPEs: 5EXPL: 0CVE-2024-46859 – platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses
https://notcve.org/view.php?id=CVE-2024-46859
In the Linux kernel, the following vulnerability has been resolved: platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses The panasonic laptop code in various places uses the SINF array with index values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array is big enough. Not all panasonic laptops have this many SINF array entries, for example the Toughbook CF-18 model only has 10 SINF array entries. So it only supports the AC+DC brightness entries and mute. Check that the SINF array has a minimum size which covers all AC+DC brightness entries and refuse to load if the SINF array is smaller. For higher SINF indexes hide the sysfs attributes when the SINF array does not contain an entry for that attribute, avoiding show()/store() accessing the array out of bounds and add bounds checking to the probe() and resume() code accessing these. • https://git.kernel.org/stable/c/e424fb8cc4e6634c10f8159b1ff5618cf7bab9c6 https://git.kernel.org/stable/c/b7c2f692307fe704be87ea80d7328782b33c3cef https://git.kernel.org/stable/c/9291fadbd2720a869b1d2fcf82305648e2e62a16 https://git.kernel.org/stable/c/6821a82616f60aa72c5909b3e252ad97fb9f7e2a https://git.kernel.org/stable/c/b38c19783286a71693c2194ed1b36665168c09c4 https://git.kernel.org/stable/c/f52e98d16e9bd7dd2b3aef8e38db5cbc9899d6a4 •
CVSS: -EPSS: 0%CPEs: 6EXPL: 0CVE-2024-46858 – mptcp: pm: Fix uaf in __timer_delete_sync
https://notcve.org/view.php?id=CVE-2024-46858
In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: Fix uaf in __timer_delete_sync There are two paths to access mptcp_pm_del_add_timer, result in a race condition: CPU1 CPU2 ==== ==== net_rx_action napi_poll netlink_sendmsg __napi_poll netlink_unicast process_backlog netlink_unicast_kernel __netif_receive_skb genl_rcv __netif_receive_skb_one_core netlink_rcv_skb NF_HOOK genl_rcv_msg ip_local_deliver_finish genl_family_rcv_msg ip_protocol_deliver_rcu genl_family_rcv_msg_doit tcp_v4_rcv mptcp_pm_nl_flush_addrs_doit tcp_v4_do_rcv mptcp_nl_remove_addrs_list tcp_rcv_established mptcp_pm_remove_addrs_and_subflows tcp_data_queue remove_anno_list_by_saddr mptcp_incoming_options mptcp_pm_del_add_timer mptcp_pm_del_add_timer kfree(entry) In remove_anno_list_by_saddr(running on CPU2), after leaving the critical zone protected by "pm.lock", the entry will be released, which leads to the occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1). Keeping a reference to add_timer inside the lock, and calling sk_stop_timer_sync() with this reference, instead of "entry->add_timer". Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock, do not directly access any members of the entry outside the pm lock, which can avoid similar "entry->x" uaf. • https://git.kernel.org/stable/c/00cfd77b9063dcdf3628a7087faba60de85a9cc8 https://git.kernel.org/stable/c/0e7814b028cd50b3ff79659d23dfa9da6a1e75e1 https://git.kernel.org/stable/c/3554482f4691571fc4b5490c17ae26896e62171c https://git.kernel.org/stable/c/67409b358500c71632116356a0b065f112d7b707 https://git.kernel.org/stable/c/6452b162549c7f9ef54655d3fb9977b9192e6e5b https://git.kernel.org/stable/c/12134a652b0a10064844ea235173e70246eba6dc https://git.kernel.org/stable/c/b4cd80b0338945a94972ac3ed54f8338d2da2076 •