CVSS: 4.4EPSS: 0%CPEs: 2EXPL: 0CVE-2021-47076 – RDMA/rxe: Return CQE error if invalid lkey was supplied
https://notcve.org/view.php?id=CVE-2021-47076
In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Return CQE error if invalid lkey was supplied RXE is missing update of WQE status in LOCAL_WRITE failures. This caused the following kernel panic if someone sent an atomic operation with an explicitly wrong lkey. [leonro@vm ~]$ mkt test test_atomic_invalid_lkey (tests.test_atomic.AtomicTest) ... WARNING: CPU: 5 PID: 263 at drivers/infiniband/sw/rxe/rxe_comp.c:740 rxe_completer+0x1a6d/0x2e30 [rdma_rxe] Modules linked in: crc32_generic rdma_rxe ip6_udp_tunnel udp_tunnel rdma_ucm rdma_cm ib_umad ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core ptp pps_core CPU: 5 PID: 263 Comm: python3 Not tainted 5.13.0-rc1+ #2936 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:rxe_completer+0x1a6d/0x2e30 [rdma_rxe] Code: 03 0f 8e 65 0e 00 00 3b 93 10 06 00 00 0f 84 82 0a 00 00 4c 89 ff 4c 89 44 24 38 e8 2d 74 a9 e1 4c 8b 44 24 38 e9 1c f5 ff ff <0f> 0b e9 0c e8 ff ff b8 05 00 00 00 41 bf 05 00 00 00 e9 ab e7 ff RSP: 0018:ffff8880158af090 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888016a78000 RCX: ffffffffa0cf1652 RDX: 1ffff9200004b442 RSI: 0000000000000004 RDI: ffffc9000025a210 RBP: dffffc0000000000 R08: 00000000ffffffea R09: ffff88801617740b R10: ffffed1002c2ee81 R11: 0000000000000007 R12: ffff88800f3b63e8 R13: ffff888016a78008 R14: ffffc9000025a180 R15: 000000000000000c FS: 00007f88b622a740(0000) GS:ffff88806d540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f88b5a1fa10 CR3: 000000000d848004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rxe_do_task+0x130/0x230 [rdma_rxe] rxe_rcv+0xb11/0x1df0 [rdma_rxe] rxe_loopback+0x157/0x1e0 [rdma_rxe] rxe_responder+0x5532/0x7620 [rdma_rxe] rxe_do_task+0x130/0x230 [rdma_rxe] rxe_rcv+0x9c8/0x1df0 [rdma_rxe] rxe_loopback+0x157/0x1e0 [rdma_rxe] rxe_requester+0x1efd/0x58c0 [rdma_rxe] rxe_do_task+0x130/0x230 [rdma_rxe] rxe_post_send+0x998/0x1860 [rdma_rxe] ib_uverbs_post_send+0xd5f/0x1220 [ib_uverbs] ib_uverbs_write+0x847/0xc80 [ib_uverbs] vfs_write+0x1c5/0x840 ksys_write+0x176/0x1d0 do_syscall_64+0x3f/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae • https://git.kernel.org/stable/c/8700e3e7c4857d28ebaa824509934556da0b3e76 https://git.kernel.org/stable/c/abe31d25facdb9109fe2cf69890748295291570c https://git.kernel.org/stable/c/dc07628bd2bbc1da768e265192c28ebd301f509d https://access.redhat.com/security/cve/CVE-2021-47076 https://bugzilla.redhat.com/show_bug.cgi?id=2267525 • CWE-20: Improper Input Validation •
CVSS: 5.3EPSS: 0%CPEs: 3EXPL: 0CVE-2021-47075 – nvmet: fix memory leak in nvmet_alloc_ctrl()
https://notcve.org/view.php?id=CVE-2021-47075
In the Linux kernel, the following vulnerability has been resolved: nvmet: fix memory leak in nvmet_alloc_ctrl() When creating ctrl in nvmet_alloc_ctrl(), if the cntlid_min is larger than cntlid_max of the subsystem, and jumps to the "out_free_changed_ns_list" label, but the ctrl->sqs lack of be freed. Fix this by jumping to the "out_free_sqs" label. • https://git.kernel.org/stable/c/94a39d61f80fcd679debda11e1ca02b88d90e67e https://git.kernel.org/stable/c/4720f29acb3fe67aa8aa71e6b675b079d193aaeb https://git.kernel.org/stable/c/afb680ed7ecbb7fd66ddb43650e9b533fd8b4b9a https://git.kernel.org/stable/c/fec356a61aa3d3a66416b4321f1279e09e0f256f •
CVSS: -EPSS: 0%CPEs: 3EXPL: 0CVE-2021-47074 – nvme-loop: fix memory leak in nvme_loop_create_ctrl()
https://notcve.org/view.php?id=CVE-2021-47074
In the Linux kernel, the following vulnerability has been resolved: nvme-loop: fix memory leak in nvme_loop_create_ctrl() When creating loop ctrl in nvme_loop_create_ctrl(), if nvme_init_ctrl() fails, the loop ctrl should be freed before jumping to the "out" label. • https://git.kernel.org/stable/c/3a85a5de29ea779634ddfd768059e06196687aba https://git.kernel.org/stable/c/9c980795ccd77e8abec33dd6fe28dfe1c4083e65 https://git.kernel.org/stable/c/551ba08d4b7eb26f75758cdb9f15105b276517ad https://git.kernel.org/stable/c/03504e3b54cc8118cc26c064e60a0b00c2308708 •
CVSS: 2.3EPSS: 0%CPEs: 5EXPL: 0CVE-2021-47073 – platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios
https://notcve.org/view.php?id=CVE-2021-47073
In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios init_dell_smbios_wmi() only registers the dell_smbios_wmi_driver on systems where the Dell WMI interface is supported. While exit_dell_smbios_wmi() unregisters it unconditionally, this leads to the following oops: [ 175.722921] ------------[ cut here ]------------ [ 175.722925] Unexpected driver unregister! [ 175.722939] WARNING: CPU: 1 PID: 3630 at drivers/base/driver.c:194 driver_unregister+0x38/0x40 ... [ 175.723089] Call Trace: [ 175.723094] cleanup_module+0x5/0xedd [dell_smbios] ... [ 175.723148] ---[ end trace 064c34e1ad49509d ]--- Make the unregister happen on the same condition the register happens to fix this. • https://git.kernel.org/stable/c/1a258e670434f404a4500b65ba1afea2c2b29bba https://git.kernel.org/stable/c/75cfc833da4a2111106d4c134e93e0c7f41e35e7 https://git.kernel.org/stable/c/6fa78a6b9a3beb676a010dc489c1257f7e432525 https://git.kernel.org/stable/c/0cf036a0d325200e6c27b90908e51195bbc557b1 https://git.kernel.org/stable/c/8d746ea7c687bab060a2c05a35c449302406cd52 https://git.kernel.org/stable/c/3a53587423d25c87af4b4126a806a0575104b45e https://access.redhat.com/security/cve/CVE-2021-47073 https://bugzilla.redhat.com/show_bug.cgi?id=2267518 • CWE-99: Improper Control of Resource Identifiers ('Resource Injection') •
CVSS: -EPSS: 0%CPEs: 2EXPL: 0CVE-2021-47072 – btrfs: fix removed dentries still existing after log is synced
https://notcve.org/view.php?id=CVE-2021-47072
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix removed dentries still existing after log is synced When we move one inode from one directory to another and both the inode and its previous parent directory were logged before, we are not supposed to have the dentry for the old parent if we have a power failure after the log is synced. Only the new dentry is supposed to exist. Generally this works correctly, however there is a scenario where this is not currently working, because the old parent of the file/directory that was moved is not authoritative for a range that includes the dir index and dir item keys of the old dentry. This case is better explained with the following example and reproducer: # The test requires a very specific layout of keys and items in the # fs/subvolume btree to trigger the bug. So we want to make sure that # on whatever platform we are, we have the same leaf/node size. # # Currently in btrfs the node/leaf size can not be smaller than the page # size (but it can be greater than the page size). So use the largest # supported node/leaf size (64K). $ mkfs.btrfs -f -n 65536 /dev/sdc $ mount /dev/sdc /mnt # "testdir" is inode 257. $ mkdir /mnt/testdir $ chmod 755 /mnt/testdir # Create several empty files to have the directory "testdir" with its # items spread over several leaves (7 in this case). $ for ((i = 1; i <= 1200; i++)); do echo -n > /mnt/testdir/file$i done # Create our test directory "dira", inode number 1458, which gets all # its items in leaf 7. # # The BTRFS_DIR_ITEM_KEY item for inode 257 ("testdir") that points to # the entry named "dira" is in leaf 2, while the BTRFS_DIR_INDEX_KEY # item that points to that entry is in leaf 3. # # For this particular filesystem node size (64K), file count and file # names, we endup with the directory entry items from inode 257 in # leaves 2 and 3, as previously mentioned - what matters for triggering # the bug exercised by this test case is that those items are not placed # in leaf 1, they must be placed in a leaf different from the one # containing the inode item for inode 257. # # The corresponding BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items for # the parent inode (257) are the following: # # item 460 key (257 DIR_ITEM 3724298081) itemoff 48344 itemsize 34 # location key (1458 INODE_ITEM 0) type DIR # transid 6 data_len 0 name_len 4 # name: dira # # and: # # item 771 key (257 DIR_INDEX 1202) itemoff 36673 itemsize 34 # location key (1458 INODE_ITEM 0) type DIR # transid 6 data_len 0 name_len 4 # name: dira $ mkdir /mnt/testdir/dira # Make sure everything done so far is durably persisted. $ sync # Now do a change to inode 257 ("testdir") that does not result in # COWing leaves 2 and 3 - the leaves that contain the directory items # pointing to inode 1458 (directory "dira"). # # Changing permissions, the owner/group, updating or adding a xattr, # etc, will not change (COW) leaves 2 and 3. • https://git.kernel.org/stable/c/64d6b281ba4db044c946158387c74e1149b9487e https://git.kernel.org/stable/c/6d0924c5b742036b4f20a0ffdf2b6cf3f963f5f6 https://git.kernel.org/stable/c/54a40fc3a1da21b52dbf19f72fdc27a2ec740760 •