Page 65 of 497 results (0.009 seconds)

CVSS: 7.5EPSS: 0%CPEs: 23EXPL: 0

CVE-2019-0014 – Junos OS: QFX and PTX Series: FPC process crashes after J-Flow processes a malformed packet

https://notcve.org/view.php?id=CVE-2019-0014

On QFX and PTX Series, receipt of a malformed packet for J-Flow sampling might crash the FPC (Flexible PIC Concentrator) process which causes all interfaces to go down. By continuously sending the offending packet, an attacker can repeatedly crash the FPC process causing a sustained Denial of Service (DoS). This issue affects both IPv4 and IPv6 packet processing. Affected releases are Juniper Networks Junos OS on QFX and PTX Series: 17.4 versions prior to 17.4R2-S1, 17.4R3; 18.1 versions prior to 18.1R3-S1; 18.2 versions prior to 18.2R1-S3, 18.2R2; 17.2X75 versions prior to 17.2X75-D91, 17.2X75-D100. En las series QFX y PTX, la recepción de un paquete mal formado para el muestreo de J-Flow podría provocar el cierre inesperado del proceso FPC (Flexible PIC Concentrator), que provoca que todas las interfaces se caigan. • http://www.securityfocus.com/bid/106556 https://kb.juniper.net/JSA10914 • CWE-19: Data Processing Errors •

CVSS: 5.5EPSS: 0%CPEs: 95EXPL: 0

CVE-2019-0015 – Junos OS: SRX Series: Deleted dynamic VPN users are allowed to establish VPN connections until reboot

https://notcve.org/view.php?id=CVE-2019-0015

A vulnerability in the SRX Series Service Gateway allows deleted dynamic VPN users to establish dynamic VPN connections until the device is rebooted. A deleted dynamic VPN connection should be immediately disallowed from establishing new VPN connections. Due to an error in token caching, deleted users are allowed to connect once a previously successful dynamic VPN connection has been established. A reboot is required to clear the cached authentication token. Affected releases are Junos OS on SRX Series: 12.3X48 versions prior to 12.3X48-D75; 15.1X49 versions prior to 15.1X49-D150; 17.3 versions prior to 17.3R3; 17.4 versions prior to 17.4R2; 18.1 versions prior to 18.1R3; 18.2 versions prior to 18.2R2. • http://www.securityfocus.com/bid/106668 https://kb.juniper.net/JSA10915 • CWE-613: Insufficient Session Expiration •

CVSS: 5.3EPSS: 0%CPEs: 128EXPL: 0

CVE-2018-0061 – Junos OS: Denial of service in telnetd

https://notcve.org/view.php?id=CVE-2018-0061

A denial of service vulnerability in the telnetd service on Junos OS allows remote unauthenticated users to cause high CPU usage which may affect system performance. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D81 on SRX Series; 12.3 versions prior to 12.3R12-S11; 12.3X48 versions prior to 12.3X48-D80 on SRX Series; 15.1 versions prior to 15.1R7; 15.1X49 versions prior to 15.1X49-D150, 15.1X49-D160 on SRX Series; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400 Series; 15.1X53 versions prior to 15.1X53-D68 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D235 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D495 on NFX Series; 16.1 versions prior to 16.1R4-S12, 16.1R6-S6, 16.1R7; 16.2 versions prior to 16.2R2-S7, 16.2R3; 17.1 versions prior to 17.1R2-S9, 17.1R3; 17.2 versions prior to 17.2R2-S6, 17.2R3; 17.2X75 versions prior to 17.2X75-D100; 17.3 versions prior to 17.3R2-S4, 17.3R3; 17.4 versions prior to 17.4R1-S5, 17.4R2; 18.2X75 versions prior to 18.2X75-D5. Una vulnerabilidad de denegación de servicio (DoS) en el servicio telnetd de Junos OS permite que usuarios remotos no autenticados provoquen un alto uso de la CPU, lo que podría afectar al rendimiento del sistema. Las versiones afectadas de Juniper Networks Junos OS son: 12.1X46 en versiones anteriores a la 12.1X46-D81 en SRX Series; 12.3 en versiones anteriores a la 12.3R12-S11; 12.3X48 en versiones anteriores a la 12.3X48-D80 en SRX Series; 15.1 en versiones anteriores a la 15.1R7; 15.1X49 en versiones anteriores a la 15.1X49-D150, 15.1X49-D160 en SRX Series; 15.1X53 en versiones anteriores a la 15.1X53-D59 en EX2300/EX3400 Series; 15.1X53 en versiones anteriores a la 15.1X53-D68 en QFX10K Series; 15.1X53 en versiones anteriores a la 15.1X53-D235 en QFX5200/QFX5110 Series; 15.1X53 en versiones anteriores a la 15.1X53-D495 en NFX Series; 16.1 en versiones anteriores a la 16.1R4-S12, 16.1R6-S6, 16.1R7; 16.2 en versiones anteriores a la 16.2R2-S7, 16.2R3; 17.1 en versiones anteriores a la 17.1R2-S9, 17.1R3; 17.2 en versiones anteriores a la 17.2R2-S6, 17.2R3; 17.2X75 en versiones anteriores a la 17.2X75-D100; 17.3 en versiones anteriores a la 17.3R2-S4, 17.3R3; 17.4 en versiones anteriores a la 17.4R1-S5, 17.4R2 y 18.2X75 en versiones anteriores a la 18.2X75-D5. • http://www.securitytracker.com/id/1041859 https://kb.juniper.net/JSA10896 • CWE-400: Uncontrolled Resource Consumption •

CVSS: 6.5EPSS: 0%CPEs: 131EXPL: 0

CVE-2018-0054 – QFX5000/EX4600 Series: Routing protocol flap upon receipt of high rate of Ethernet frames

https://notcve.org/view.php?id=CVE-2018-0054

On QFX5000 Series and EX4600 switches, a high rate of Ethernet pause frames or an ARP packet storm received on the management interface (fxp0) can cause egress interface congestion, resulting in routing protocol packet drops, such as BGP, leading to peering flaps. The following log message may also be displayed: fpc0 dcbcm_check_stuck_buffers: Buffers are stuck on queue 7 of port 45 This issue only affects the QFX5000 Series products (QFX5100, QFX5110, QFX5200, QFX5210) and the EX4600 switch. No other platforms are affected by this issue. Affected releases are Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D47 on QFX5000 Series and EX4600; 15.1 versions prior to 15.1R7, 15.1R8 on QFX5000 Series and EX4600; 15.1X53 versions prior to 15.1X53-D233 on QFX5000 Series and EX4600; 16.1 versions prior to 16.1R7 on QFX5000 Series and EX4600; 16.2 versions prior to 16.2R3 on QFX5000 Series and EX4600; 17.1 versions prior to 17.1R2-S9, 17.1R3 on QFX5000 Series and EX4600; 17.2 versions prior to 17.2R2-S6, 17.2R3 on QFX5000 Series and EX4600; 17.2X75 versions prior to 17.2X75-D42 on QFX5000 Series and EX4600; 17.3 versions prior to 17.3R3 on QFX5000 Series and EX4600; 17.4 versions prior to 17.4R2 on QFX5000 Series and EX4600; 18.1 versions prior to 18.1R2 on QFX5000 Series and EX4600. En los switches QFX5000 Series y EX4600, una alta tasa de tramas de pausa Ethernet en una tormenta de paquetes ARP recibida en la interfaz de gestión (fxp0) puede provocar una congestión de la interfaz egress, lo que resulta en caídas del paquete del protocolo de enrutamiento, como BGP, lo que conduce a flaps de emparejamiento. • http://www.securitytracker.com/id/1041855 https://kb.juniper.net/JSA10888 • CWE-400: Uncontrolled Resource Consumption •

CVSS: 5.9EPSS: 0%CPEs: 83EXPL: 0

CVE-2018-0060 – Junos OS: Invalid IP/mask learned from DHCP server might cause device control daemon (dcd) process crash

https://notcve.org/view.php?id=CVE-2018-0060

An improper input validation weakness in the device control daemon process (dcd) of Juniper Networks Junos OS allows an attacker to cause a Denial of Service to the dcd process and interfaces and connected clients when the Junos device is requesting an IP address for itself. Junos devices are not vulnerable to this issue when not configured to use DHCP. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D40 on SRX Series; 12.3X48 versions prior to 12.3X48-D20 on SRX Series; 14.1X53 versions prior to 14.1X53-D40 on EX2200/VC, EX3200, EX3300/VC, EX4200, EX4300, EX4550/VC, EX4600, EX6200, EX8200/VC (XRE), QFX3500, QFX3600, QFX5100; 15.1X49 versions prior to 15.1X49-D20 on SRX Series; 15.1X53 versions prior to 15.1X53-D68 on QFX10000 Series; 15.1X53 versions prior to 15.1X53-D235 on QFX5200/QFX5110; 15.1X53 versions prior to 15.1X53-D495 on NFX150, NFX250; 15.1X53 versions prior to 15.1X53-D590 on EX2300/EX3400; 15.1 versions prior to 15.1R7-S2. Una debilidad de validación de entradas incorrecta en el proceso del demonio de control del dispositivo (dcd) de Juniper Networks Junos OS permite que un atacante provoque una denegación de servicio (DoS) en el proceso y las interfaces dcd, así como los clientes conectados, cuando el dispositivo Junos solicita una dirección IP para sí mismo. Los dispositivos Junos no son vulnerables a este problema cuando no están configurados para emplear DHCP. • http://www.securitytracker.com/id/1041858 https://kb.juniper.net/JSA10895 • CWE-20: Improper Input Validation •