Page 68 of 2638 results (0.008 seconds)

CVSS: -EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: drm/exynos/vidi: fix memory leak in .get_modes() The duplicated EDID is never freed. Fix it. • https://git.kernel.org/stable/c/540ca99729e28dbe902b01039a3b4bd74520a819 https://git.kernel.org/stable/c/ebcf81504fef03f701b9711e43fea4fe2d82ebc8 https://git.kernel.org/stable/c/0acc356da8546b5c55aabfc2e2c5caa0ac9b0003 https://git.kernel.org/stable/c/777838c9b571674ef14dbddf671f372265879226 https://git.kernel.org/stable/c/dcba6bedb439581145d8aa6b0925209f23184ae1 https://git.kernel.org/stable/c/a269c5701244db2722ae0fce5d1854f5d8f31224 https://git.kernel.org/stable/c/cb3ac233434dba130281db330c4b15665b2d2c4d https://git.kernel.org/stable/c/38e3825631b1f314b21e3ade00b5a4d73 •

CVSS: 6.1EPSS: 0%CPEs: 5EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: xhci: Handle TD clearing for multiple streams case When multiple streams are in use, multiple TDs might be in flight when an endpoint is stopped. We need to issue a Set TR Dequeue Pointer for each, to ensure everything is reset properly and the caches cleared. Change the logic so that any N>1 TDs found active for different streams are deferred until after the first one is processed, calling xhci_invalidate_cancelled_tds() again from xhci_handle_cmd_set_deq() to queue another command until we are done with all of them. Also change the error/"should never happen" paths to ensure we at least clear any affected TDs, even if we can't issue a command to clear the hardware cache, and complain loudly with an xhci_warn() if this ever happens. This problem case dates back to commit e9df17eb1408 ("USB: xhci: Correct assumptions about number of rings per endpoint.") early on in the XHCI driver's life, when stream support was first added. It was then identified but not fixed nor made into a warning in commit 674f8438c121 ("xhci: split handling halted endpoints into two steps"), which added a FIXME comment for the problem case (without materially changing the behavior as far as I can tell, though the new logic made the problem more obvious). Then later, in commit 94f339147fc3 ("xhci: Fix failure to give back some cached cancelled URBs."), it was acknowledged again. [Mathias: commit 94f339147fc3 ("xhci: Fix failure to give back some cached cancelled URBs.") was a targeted regression fix to the previously mentioned patch. Users reported issues with usb stuck after unmounting/disconnecting UAS devices. This rolled back the TD clearing of multiple streams to its original state.] Apparently the commit author was aware of the problem (yet still chose to submit it): It was still mentioned as a FIXME, an xhci_dbg() was added to log the problem condition, and the remaining issue was mentioned in the commit description. • https://git.kernel.org/stable/c/e9df17eb1408cfafa3d1844bfc7f22c7237b31b8 https://git.kernel.org/stable/c/26460c1afa311524f588e288a4941432f0de6228 https://git.kernel.org/stable/c/633f72cb6124ecda97b641fbc119340bd88d51a9 https://git.kernel.org/stable/c/949be4ec5835e0ccb3e2a8ab0e46179cb5512518 https://git.kernel.org/stable/c/61593dc413c3655e4328a351555235bc3089486a https://git.kernel.org/stable/c/5ceac4402f5d975e5a01c806438eb4e554771577 https://access.redhat.com/security/cve/CVE-2024-40927 https://bugzilla.redhat.com/show_bug.cgi?id=2297511 • CWE-820: Missing Synchronization •

CVSS: -EPSS: 0%CPEs: 3EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: parisc: Try to fix random segmentation faults in package builds PA-RISC systems with PA8800 and PA8900 processors have had problems with random segmentation faults for many years. Systems with earlier processors are much more stable. Systems with PA8800 and PA8900 processors have a large L2 cache which needs per page flushing for decent performance when a large range is flushed. The combined cache in these systems is also more sensitive to non-equivalent aliases than the caches in earlier systems. The majority of random segmentation faults that I have looked at appear to be memory corruption in memory allocated using mmap and malloc. My first attempt at fixing the random faults didn't work. On reviewing the cache code, I realized that there were two issues which the existing code didn't handle correctly. Both relate to cache move-in. • https://git.kernel.org/stable/c/5bf196f1936bf93df31112fbdfb78c03537c07b0 https://git.kernel.org/stable/c/d66f2607d89f760cdffed88b22f309c895a2af20 https://git.kernel.org/stable/c/72d95924ee35c8cd16ef52f912483ee938a34d49 •

CVSS: 4.7EPSS: 0%CPEs: 13EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Fix deadlock in ieee80211_sta_ps_deliver_wakeup() The ieee80211_sta_ps_deliver_wakeup() function takes sta->ps_lock to synchronizes with ieee80211_tx_h_unicast_ps_buf() which is called from softirq context. However using only spin_lock() to get sta->ps_lock in ieee80211_sta_ps_deliver_wakeup() does not prevent softirq to execute on this same CPU, to run ieee80211_tx_h_unicast_ps_buf() and try to take this same lock ending in deadlock. Below is an example of rcu stall that arises in such situation. rcu: INFO: rcu_sched self-detected stall on CPU rcu: 2-....: (42413413 ticks this GP) idle=b154/1/0x4000000000000000 softirq=1763/1765 fqs=21206996 rcu: (t=42586894 jiffies g=2057 q=362405 ncpus=4) CPU: 2 PID: 719 Comm: wpa_supplicant Tainted: G W 6.4.0-02158-g1b062f552873 #742 Hardware name: RPT (r1) (DT) pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : queued_spin_lock_slowpath+0x58/0x2d0 lr : invoke_tx_handlers_early+0x5b4/0x5c0 sp : ffff00001ef64660 x29: ffff00001ef64660 x28: ffff000009bc1070 x27: ffff000009bc0ad8 x26: ffff000009bc0900 x25: ffff00001ef647a8 x24: 0000000000000000 x23: ffff000009bc0900 x22: ffff000009bc0900 x21: ffff00000ac0e000 x20: ffff00000a279e00 x19: ffff00001ef646e8 x18: 0000000000000000 x17: ffff800016468000 x16: ffff00001ef608c0 x15: 0010533c93f64f80 x14: 0010395c9faa3946 x13: 0000000000000000 x12: 00000000fa83b2da x11: 000000012edeceea x10: ffff0000010fbe00 x9 : 0000000000895440 x8 : 000000000010533c x7 : ffff00000ad8b740 x6 : ffff00000c350880 x5 : 0000000000000007 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00000ac0e0e8 Call trace: queued_spin_lock_slowpath+0x58/0x2d0 ieee80211_tx+0x80/0x12c ieee80211_tx_pending+0x110/0x278 tasklet_action_common.constprop.0+0x10c/0x144 tasklet_action+0x20/0x28 _stext+0x11c/0x284 ____do_softirq+0xc/0x14 call_on_irq_stack+0x24/0x34 do_softirq_own_stack+0x18/0x20 do_softirq+0x74/0x7c __local_bh_enable_ip+0xa0/0xa4 _ieee80211_wake_txqs+0x3b0/0x4b8 __ieee80211_wake_queue+0x12c/0x168 ieee80211_add_pending_skbs+0xec/0x138 ieee80211_sta_ps_deliver_wakeup+0x2a4/0x480 ieee80211_mps_sta_status_update.part.0+0xd8/0x11c ieee80211_mps_sta_status_update+0x18/0x24 sta_apply_parameters+0x3bc/0x4c0 ieee80211_change_station+0x1b8/0x2dc nl80211_set_station+0x444/0x49c genl_family_rcv_msg_doit.isra.0+0xa4/0xfc genl_rcv_msg+0x1b0/0x244 netlink_rcv_skb+0x38/0x10c genl_rcv+0x34/0x48 netlink_unicast+0x254/0x2bc netlink_sendmsg+0x190/0x3b4 ____sys_sendmsg+0x1e8/0x218 ___sys_sendmsg+0x68/0x8c __sys_sendmsg+0x44/0x84 __arm64_sys_sendmsg+0x20/0x28 do_el0_svc+0x6c/0xe8 el0_svc+0x14/0x48 el0t_64_sync_handler+0xb0/0xb4 el0t_64_sync+0x14c/0x150 Using spin_lock_bh()/spin_unlock_bh() instead prevents softirq to raise on the same CPU that is holding the lock. • https://git.kernel.org/stable/c/1d147bfa64293b2723c4fec50922168658e613ba https://git.kernel.org/stable/c/ad64b463d919a18be70b281efb135231169caf4a https://git.kernel.org/stable/c/46a5a5493360f995b834eb3b828eb59da4604509 https://git.kernel.org/stable/c/a7ee1a84a81555b19ec3d02f104bfd70cf0b668a https://git.kernel.org/stable/c/58d4310586466840dab77e56e53f4508853a5268 https://git.kernel.org/stable/c/fcb6d3c79824d350893edfa7b50d6ba1f670c4ec https://git.kernel.org/stable/c/e51637e0c66a6f72d134d9f95daa47ea62b43c7e https://git.kernel.org/stable/c/28ba44d680a30c51cf485a2f5a3b680e6 • CWE-833: Deadlock •

CVSS: -EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). • https://git.kernel.org/stable/c/9908a32e94de2141463e104c9924279ed3509447 https://git.kernel.org/stable/c/217d1f44fff560b3995a685a60aa66e55a7f0f56 https://git.kernel.org/stable/c/05b2cd6d33f700597e6f081b53c668a226a96d28 https://git.kernel.org/stable/c/c0747d76eb05542b5d49f67069b64ef5ff732c6c https://git.kernel.org/stable/c/53250b54c92fe087fd4b0c48f85529efe1ebd879 https://git.kernel.org/stable/c/02a4c0499fc3a02e992b4c69a9809912af372d94 https://git.kernel.org/stable/c/72a3fe36cf9f0d030865e571f45a40f9c1e07e8a https://git.kernel.org/stable/c/82075aff7ffccb1e72b0ac8aa349e4736 •