Page 7 of 138 results (0.013 seconds)

CVSS: 6.8EPSS: 0%CPEs: 203EXPL: 0

A vulnerability in the Link Layer Discovery Protocol (LLDP) message parser of Cisco IOS Software and Cisco IOS XE Software could allow an attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper initialization of a buffer. An attacker could exploit this vulnerability via any of the following methods: An authenticated, remote attacker could access the LLDP neighbor table via either the CLI or SNMP while the device is in a specific state. An unauthenticated, adjacent attacker could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then waiting for an administrator of the device or a network management system (NMS) managing the device to retrieve the LLDP neighbor table of the device via either the CLI or SNMP. An authenticated, adjacent attacker with SNMP read-only credentials or low privileges on the device CLI could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then accessing the LLDP neighbor table via either the CLI or SNMP. • https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-lldp-dos-sBnuHSjT • CWE-456: Missing Initialization of a Variable CWE-665: Improper Initialization •

CVSS: 7.7EPSS: 0%CPEs: 834EXPL: 0

A vulnerability in the TrustSec CLI parser of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload. This vulnerability is due to an improper interaction between the web UI and the CLI parser. An attacker could exploit this vulnerability by requesting a particular CLI command to be run through the web UI. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. Una vulnerabilidad en el analizador TrustSec CLI de Cisco IOS and Cisco IOS XE Software podría permitir a un atacante remoto y autenticado causar una recarga de un dispositivo afectado. • https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-trustsec-dos-7fuXDR2 • CWE-435: Improper Interaction Between Multiple Correctly-Behaving Entities CWE-436: Interpretation Conflict •

CVSS: 5.8EPSS: 0%CPEs: 23EXPL: 0

A vulnerability in the access control list (ACL) programming of Cisco ASR 900 and ASR 920 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to incorrect programming of hardware when an ACL is configured using a method other than the configuration CLI. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. Una vulnerabilidad en la programación de la lista de control de acceso (ACL) de Cisco ASR 900 and ASR 920 Series Aggregation Services Routers podría permitir a un atacante remoto no autenticado omitir una ACL configurada. • https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asr900acl-UeEyCxkv • CWE-284: Improper Access Control •

CVSS: 5.8EPSS: 0%CPEs: 1EXPL: 0

A vulnerability in the Zone-Based Policy Firewall feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent the Zone-Based Policy Firewall from correctly classifying traffic. This vulnerability exists because ICMP and UDP responder-to-initiator flows are not inspected when the Zone-Based Policy Firewall has either Unified Threat Defense (UTD) or Application Quality of Experience (AppQoE) configured. An attacker could exploit this vulnerability by attempting to send UDP or ICMP flows through the network. A successful exploit could allow the attacker to inject traffic through the Zone-Based Policy Firewall, resulting in traffic being dropped because it is incorrectly classified or in incorrect reporting figures being produced by high-speed logging (HSL). Una vulnerabilidad en la funcionalidad Zone-Based Policy Firewall de Cisco IOS XE Software podría permitir a un atacante remoto no autenticado impedir que el Zone-Based Policy Firewall clasifique correctamente el tráfico. • https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-zbfw-pP9jfzwL • CWE-284: Improper Access Control •

CVSS: 8.6EPSS: 0%CPEs: 20EXPL: 0

A vulnerability in the Rate Limiting Network Address Translation (NAT) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause high CPU utilization in the Cisco QuantumFlow Processor of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to mishandling of the rate limiting feature within the QuantumFlow Processor. An attacker could exploit this vulnerability by sending large amounts of traffic that would be subject to NAT and rate limiting through an affected device. A successful exploit could allow the attacker to cause the QuantumFlow Processor utilization to reach 100 percent on the affected device, resulting in a DoS condition. Una vulnerabilidad en la funcionalidad Rate Limiting Network Address Translation (NAT) de Cisco IOS XE Software podría permitir a un atacante remoto no autenticado causar un alto uso de la CPU en el procesador Cisco QuantumFlow de un dispositivo afectado, resultando en una condición de denegación de servicio (DoS). • https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ratenat-pYVLA7wM • CWE-399: Resource Management Errors •