CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2024-50234 – wifi: iwlegacy: Clear stale interrupts before resuming device
https://notcve.org/view.php?id=CVE-2024-50234
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: Clear stale interrupts before resuming device iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up. Fix the problem by clearing out any stale interrupts before interrupts get enabled during resume. Here's a debug log of the indicent: [ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000 [ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000 [ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio. [ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload [ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282 [ 12.052207] ieee80211 phy0: il4965_mac_start enter [ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff [ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready [ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions [ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S [ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm [ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm [ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK [ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations [ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up [ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done. [ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down [ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout [ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort [ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver [ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared [ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state [ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master [ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear. [ 12.058869] ieee80211 phy0: Hardware restart was requested [ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms. [ 16.132303] ------------[ cut here ]------------ [ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143 [ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. • https://git.kernel.org/stable/c/271d282ecc15d7012e71ca82c89a6c0e13a063dd https://git.kernel.org/stable/c/9d89941e51259c2b0b8e9c10c6f1f74200d7444f https://git.kernel.org/stable/c/d0231f43df473e2f80372d0ca150eb3619932ef9 https://git.kernel.org/stable/c/8ac22fe1e2b104c37e4fecd97735f64bd6349ebc https://git.kernel.org/stable/c/23f9cef17ee315777dbe88d5c11ff6166e4d0699 https://git.kernel.org/stable/c/cedf0f1db8d5f3524339c2c6e35a8505b0f1ab73 https://git.kernel.org/stable/c/8af8294d369a871cdbcdbb4d13b87d2d6e490a1f https://git.kernel.org/stable/c/07c90acb071b9954e1fecb1e4f4f13d12 •
CVSS: -EPSS: 0%CPEs: 7EXPL: 0CVE-2024-50233 – staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg()
https://notcve.org/view.php?id=CVE-2024-50233
In the Linux kernel, the following vulnerability has been resolved: staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg() In the ad9832_write_frequency() function, clk_get_rate() might return 0. This can lead to a division by zero when calling ad9832_calc_freqreg(). The check if (fout > (clk_get_rate(st->mclk) / 2)) does not protect against the case when fout is 0. The ad9832_write_frequency() function is called from ad9832_write(), and fout is derived from a text buffer, which can contain any value. • https://git.kernel.org/stable/c/ea707584bac187c9c6c64c4eacd1c09bcc08f37b https://git.kernel.org/stable/c/fcd6b59f7a774558e2525251c68aa37aff748e55 https://git.kernel.org/stable/c/442f786c5bff8cfd756ebdeaa4aadbf05c22aa5a https://git.kernel.org/stable/c/2f39548f45693d86e950647012a214da6917dc9f https://git.kernel.org/stable/c/ccbc10647aafe2b7506edb4b10e19c6c2416c162 https://git.kernel.org/stable/c/adfbc08b94e7df08b9ed5fa26b969cc1b54c84ec https://git.kernel.org/stable/c/dd9e1cf619c945f320e686dcaf13e37ef0b05fdd https://git.kernel.org/stable/c/6bd301819f8f69331a55ae2336c8b111f •
CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2024-50218 – ocfs2: pass u64 to ocfs2_truncate_inline maybe overflow
https://notcve.org/view.php?id=CVE-2024-50218
In the Linux kernel, the following vulnerability has been resolved: ocfs2: pass u64 to ocfs2_truncate_inline maybe overflow Syzbot reported a kernel BUG in ocfs2_truncate_inline. There are two reasons for this: first, the parameter value passed is greater than ocfs2_max_inline_data_with_xattr, second, the start and end parameters of ocfs2_truncate_inline are "unsigned int". So, we need to add a sanity check for byte_start and byte_len right before ocfs2_truncate_inline() in ocfs2_remove_inode_range(), if they are greater than ocfs2_max_inline_data_with_xattr return -EINVAL. • https://git.kernel.org/stable/c/1afc32b952335f665327a1a9001ba1b44bb76fd9 https://git.kernel.org/stable/c/27d95867bee806cdc448d122bd99f1d8b0544035 https://git.kernel.org/stable/c/95fbed8ae8c32c0977e6be1721c190d8fea23f2f https://git.kernel.org/stable/c/70767689ec6ee5f05fb0a2c17d7ec1927946e486 https://git.kernel.org/stable/c/ecd62f684386fa64f9c0cea92eea361f4e6444c2 https://git.kernel.org/stable/c/2fe5d62e122b040ce7fc4d31aa7fa96ae328cefc https://git.kernel.org/stable/c/88f97a4b5843ce21c1286e082c02a5fb4d8eb473 https://git.kernel.org/stable/c/0b6b8c2055784261de3fb641c5d0d6396 •
CVSS: -EPSS: 0%CPEs: 3EXPL: 0CVE-2024-50211 – udf: refactor inode_bmap() to handle error
https://notcve.org/view.php?id=CVE-2024-50211
In the Linux kernel, the following vulnerability has been resolved: udf: refactor inode_bmap() to handle error Refactor inode_bmap() to handle error since udf_next_aext() can return error now. On situations like ftruncate, udf_extend_file() can now detect errors and bail out early without resorting to checking for particular offsets and assuming internal behavior of these functions. • https://git.kernel.org/stable/c/493447dd8336607fce426f7879e581095f6c606e https://git.kernel.org/stable/c/b22d9a5698abf04341f8fbc30141e0673863c3a6 https://git.kernel.org/stable/c/c226964ec786f3797ed389a16392ce4357697d24 •
CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2024-50202 – nilfs2: propagate directory read errors from nilfs_find_entry()
https://notcve.org/view.php?id=CVE-2024-50202
In the Linux kernel, the following vulnerability has been resolved: nilfs2: propagate directory read errors from nilfs_find_entry() Syzbot reported that a task hang occurs in vcs_open() during a fuzzing test for nilfs2. The root cause of this problem is that in nilfs_find_entry(), which searches for directory entries, ignores errors when loading a directory page/folio via nilfs_get_folio() fails. If the filesystem images is corrupted, and the i_size of the directory inode is large, and the directory page/folio is successfully read but fails the sanity check, for example when it is zero-filled, nilfs_check_folio() may continue to spit out error messages in bursts. Fix this issue by propagating the error to the callers when loading a page/folio fails in nilfs_find_entry(). The current interface of nilfs_find_entry() and its callers is outdated and cannot propagate error codes such as -EIO and -ENOMEM returned via nilfs_find_entry(), so fix it together. • https://git.kernel.org/stable/c/2ba466d74ed74f073257f86e61519cb8f8f46184 https://git.kernel.org/stable/c/bb857ae1efd3138c653239ed1e7aef14e1242c81 https://git.kernel.org/stable/c/b4b3dc9e7e604be98a222e9f941f5e93798ca475 https://git.kernel.org/stable/c/c1d0476885d708a932980b0f28cd90d9bd71db39 https://git.kernel.org/stable/c/edf8146057264191d5bfe5b91773f13d936dadd3 https://git.kernel.org/stable/c/270a6f9df35fa2aea01ec23770dc9b3fc9a12989 https://git.kernel.org/stable/c/9698088ac7704e260f492d9c254e29ed7dd8729a https://git.kernel.org/stable/c/efa810b15a25531cbc2f527330947b9fe •