CVE-2021-31364 – Junos OS: SRX Series: The flowd process will crash if log session-close is configured and specific traffic is received
https://notcve.org/view.php?id=CVE-2021-31364
An Improper Check for Unusual or Exceptional Conditions vulnerability combined with a Race Condition in the flow daemon (flowd) of Juniper Networks Junos OS on SRX300 Series, SRX500 Series, SRX1500, and SRX5000 Series with SPC2 allows an unauthenticated network based attacker sending specific traffic to cause a crash of the flowd/srxpfe process, responsible for traffic forwarding in SRX, which will cause a Denial of Service (DoS). Continued receipt and processing of this specific traffic will create a sustained Denial of Service (DoS) condition. This issue can only occur when specific packets are trying to create the same session and logging for session-close is configured as a policy action. Affected platforms are: SRX300 Series, SRX500 Series, SRX1500, and SRX5000 Series with SPC2. Not affected platforms are: SRX4000 Series, SRX5000 Series with SPC3, and vSRX Series. • https://kb.juniper.net/JSA11226 • CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') CWE-754: Improper Check for Unusual or Exceptional Conditions •
CVE-2021-0289 – Junos OS: User-defined ARP Policer isn't applied on Aggregated Ethernet (AE) interface until firewall process is restarted
https://notcve.org/view.php?id=CVE-2021-0289
When user-defined ARP Policer is configured and applied on one or more Aggregated Ethernet (AE) interface units, a Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability between the Device Control Daemon (DCD) and firewall process (dfwd) daemons of Juniper Networks Junos OS allows an attacker to bypass the user-defined ARP Policer. In this particular case the User ARP policer is replaced with default ARP policer. To review the desired ARP Policers and actual state one can run the command "show interfaces <> extensive" and review the output. See further details below. An example output is: show interfaces extensive | match policer Policer: Input: __default_arp_policer__ <<< incorrect if user ARP Policer was applied on an AE interface and the default ARP Policer is displayed Policer: Input: jtac-arp-ae5.317-inet-arp <<< correct if user ARP Policer was applied on an AE interface For all platforms, except SRX Series: This issue affects Juniper Networks Junos OS: All versions 5.6R1 and all later versions prior to 18.4 versions prior to 18.4R2-S9, 18.4R3-S9 with the exception of 15.1 versions 15.1R7-S10 and later versions; 19.4 versions prior to 19.4R3-S3; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R3-S2; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2; This issue does not affect Juniper Networks Junos OS versions prior to 5.6R1. • https://kb.juniper.net/JSA11191 • CWE-367: Time-of-check Time-of-use (TOCTOU) Race Condition •
CVE-2021-0275 – Junos OS: J-Web: Cross-site scripting attack allows an attacker to gain control of another users session.
https://notcve.org/view.php?id=CVE-2021-0275
A Cross-site Scripting (XSS) vulnerability in J-Web on Juniper Networks Junos OS allows an attacker to target another user's session thereby gaining access to the users session. The other user session must be active for the attack to succeed. Once successful, the attacker has the same privileges as the user. If the user has root privileges, the attacker may be able to gain full control of the device. This issue affects: Juniper Networks Junos OS: 12.3 versions prior to 12.3R12-S15 on EX Series; 12.3X48 versions prior to 12.3X48-D95 on SRX Series; 15.1 versions prior to 15.1R7-S6 on EX Series; 15.1X49 versions prior to 15.1X49-D200 on SRX Series; 16.1 versions prior to 16.1R7-S7; 16.2 versions prior to 16.2R2-S11, 16.2R3; 17.1 versions prior to 17.1R2-S11, 17.1R3-S2; 17.2 versions prior to 17.2R3-S3; 17.3 versions prior to 17.3R2-S5, 17.3R3-S7; 17.4 versions prior to 17.4R2-S9, 17.4R3; 18.1 versions prior to 18.1R3-S9; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R2-S3, 18.3R3-S1; 18.4 versions prior to 18.4R1-S6, 18.4R2-S4, 18.4R3; 19.1 versions prior to 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S3, 19.2R2; 19.3 versions prior to 19.3R2. • https://kb.juniper.net/JSA11166 • CWE-79: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') •
CVE-2021-0261 – Junos OS: Denial of Service vulnerability in J-Web and web based (HTTP/HTTPS) services caused by a high number of specific requests
https://notcve.org/view.php?id=CVE-2021-0261
A vulnerability in the HTTP/HTTPS service used by J-Web, Web Authentication, Dynamic-VPN (DVPN), Firewall Authentication Pass-Through with Web-Redirect, and Captive Portal allows an unauthenticated attacker to cause an extended Denial of Service (DoS) for these services by sending a high number of specific requests. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S17 on EX Series; 12.3X48 versions prior to 12.3X48-D105 on SRX Series; 15.1 versions prior to 15.1R7-S8; 15.1X49 versions prior to 15.1X49-D230 on SRX Series; 16.1 versions prior to 16.1R7-S8; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2; 20.2 versions prior to 20.2R1-S1, 20.2R2. Una vulnerabilidad en el servicio HTTP/HTTPS utilizado por -Web, Web Authentication, Dynamic-VPN (DVPN), Firewall Authentication Pass-Through con Web-Redirect, y Captive Portal, permite a un atacante no autenticado causar una Denegación de Servicio extendida (DoS) para estos servicios mediante el envío de un gran número de peticiones específicas. Este problema afecta a: Juniper Networks Junos OS versiones 12.3 anteriores a 12.3R12-S17 en la serie EX; Versiones de 12.3X48 anteriores a 12.3X48-D105 en la serie SRX; versiones 15.1 anteriores a 15.1R7-S8; Versiones de 15.1X49 anteriores a 15.1X49-D230 en la serie SRX; versiones 16.1 anteriores a 16.1R7-S8; versiones 17.4 anteriores a 17.4R2-S12, 17.4R3-S3; versiones 18.1 anteriores a 18.1R3-S11; versiones 18.2 anteriores a 18.2R3-S6; versiones 18.3 anteriores a 18.3R2-S4, 18.3R3-S3; versiones 18.4 anteriores a 18.4R2-S5, 18.4R3-S4; versiones 19.1 anteriores a 19.1R2-S2, 19.1R3-S2; versiones 19. 2 anteriores a 19.2R1-S5, 19.2R3; versiones 19.3 anteriores a 19.3R2-S4, 19.3R3; versiones 19.4 anteriores a 19.4R1-S3, 19.4R2-S2, 19.4R3; versiones 20.1 anteriores a 20.1R1-S3, 20.1R2; Versiones 20.2 anteriores a 20.2R1-S1, 20.2R2 • https://kb.juniper.net/JSA11152 • CWE-125: Out-of-bounds Read CWE-770: Allocation of Resources Without Limits or Throttling •
CVE-2021-0249 – Junos OS: SRX Series: A remote attacker may be able to cause a PFE buffer overflow to arbitrarily remotely execute code or commands on the target device with UTM enabled.
https://notcve.org/view.php?id=CVE-2021-0249
On SRX Series devices configured with UTM services a buffer overflow vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS may allow an attacker to arbitrarily execute code or commands on the target to take over or otherwise impact the device by sending crafted packets to or through the device. This issue affects: Juniper Networks Junos OS on SRX Series: 15.1X49 versions prior to 15.1X49-D190; 17.4 versions prior to 17.4R2-S9; 17.4R3 and later versions prior to 18.1R3-S9; 18.2 versions prior to 18.2R3-S1; 18.3 versions prior to 18.3R2-S3, 18.3R3; 18.4 versions prior to 18.4R2-S3, 18.4R3; 19.1 versions prior to 19.1R1-S4, 19.1R2; 19.2 versions prior to 19.2R1-S1, 19.2R2. An indicator of compromise can be the following text in the UTM log: RT_UTM: AV_FILE_NOT_SCANNED_PASSED_MT: En los dispositivos de la Serie SRX configurados con servicios UTM, una vulnerabilidad de desbordamiento de búfer en el Packet Forwarding Engine (PFE) de Juniper Networks Junos OS, puede permitir a un atacante ejecutar código o comandos arbitrarios en el objetivo para tomar el control o afectar el dispositivo mediante el envío de paquetes diseñados hacia por medio del dispositivo. Este problema afecta a: Juniper Networks Junos OS en la serie SRX: versiones 15.1X49 anteriores a 15.1X49-D190; versiones 17.4 anteriores a 17.4R2-S9; versiones 17.4R3 y posteriores anteriores a 18.1R3-S9; versiones 18.2 anteriores a 18.2R3-S1; versiones 18.3 anteriores a 18.3R2-S3, 18.3R3; versiones 18.4 anteriores a 18.4R2-S3, 18.4R3; versiones 19.1 anteriores a 19.1R1-S4, 19.1R2; versiones 19.2 anteriores a 19.2R1-S1, 19.2R2. Un indicador de compromiso puede ser el siguiente texto en el registro de UTM: RT_UTM: AV_FILE_NOT_SCANNED_PASSED_MT • https://kb.juniper.net/JSA11142 • CWE-120: Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') •