CVSS: 9.3EPSS: 0%CPEs: 143EXPL: 0CVE-2018-0052 – Junos OS: Unauthenticated remote root access possible when RSH service is enabled
https://notcve.org/view.php?id=CVE-2018-0052
If RSH service is enabled on Junos OS and if the PAM authentication is disabled, a remote unauthenticated attacker can obtain root access to the device. RSH service is disabled by default on Junos. There is no documented CLI command to enable this service. However, an undocumented CLI command allows a privileged Junos user to enable RSH service and disable PAM, and hence expose the system to unauthenticated root access. When RSH is enabled, the device is listing to RSH connections on port 514. • http://www.securitytracker.com/id/1041853 https://kb.juniper.net/JSA10886 • CWE-287: Improper Authentication •
CVSS: 6.5EPSS: 0%CPEs: 131EXPL: 0CVE-2018-0054 – QFX5000/EX4600 Series: Routing protocol flap upon receipt of high rate of Ethernet frames
https://notcve.org/view.php?id=CVE-2018-0054
On QFX5000 Series and EX4600 switches, a high rate of Ethernet pause frames or an ARP packet storm received on the management interface (fxp0) can cause egress interface congestion, resulting in routing protocol packet drops, such as BGP, leading to peering flaps. The following log message may also be displayed: fpc0 dcbcm_check_stuck_buffers: Buffers are stuck on queue 7 of port 45 This issue only affects the QFX5000 Series products (QFX5100, QFX5110, QFX5200, QFX5210) and the EX4600 switch. No other platforms are affected by this issue. Affected releases are Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D47 on QFX5000 Series and EX4600; 15.1 versions prior to 15.1R7, 15.1R8 on QFX5000 Series and EX4600; 15.1X53 versions prior to 15.1X53-D233 on QFX5000 Series and EX4600; 16.1 versions prior to 16.1R7 on QFX5000 Series and EX4600; 16.2 versions prior to 16.2R3 on QFX5000 Series and EX4600; 17.1 versions prior to 17.1R2-S9, 17.1R3 on QFX5000 Series and EX4600; 17.2 versions prior to 17.2R2-S6, 17.2R3 on QFX5000 Series and EX4600; 17.2X75 versions prior to 17.2X75-D42 on QFX5000 Series and EX4600; 17.3 versions prior to 17.3R3 on QFX5000 Series and EX4600; 17.4 versions prior to 17.4R2 on QFX5000 Series and EX4600; 18.1 versions prior to 18.1R2 on QFX5000 Series and EX4600. En los switches QFX5000 Series y EX4600, una alta tasa de tramas de pausa Ethernet en una tormenta de paquetes ARP recibida en la interfaz de gestión (fxp0) puede provocar una congestión de la interfaz egress, lo que resulta en caídas del paquete del protocolo de enrutamiento, como BGP, lo que conduce a flaps de emparejamiento. • http://www.securitytracker.com/id/1041855 https://kb.juniper.net/JSA10888 • CWE-400: Uncontrolled Resource Consumption •
CVSS: 8.8EPSS: 0%CPEs: 295EXPL: 0CVE-2018-0043 – Junos OS: RPD daemon crashes upon receipt of specific MPLS packet
https://notcve.org/view.php?id=CVE-2018-0043
Receipt of a specific MPLS packet may cause the routing protocol daemon (RPD) process to crash and restart or may lead to remote code execution. By continuously sending specific MPLS packets, an attacker can repeatedly crash the RPD process causing a sustained Denial of Service. This issue affects both IPv4 and IPv6. This issue can only be exploited from within the MPLS domain. End-users connected to the CE device cannot cause this crash. • http://www.securitytracker.com/id/1041847 https://kb.juniper.net/JSA10877 • CWE-20: Improper Input Validation •
CVSS: 8.8EPSS: 0%CPEs: 205EXPL: 0CVE-2018-0045 – Junos OS: RPD daemon crashes due to receipt of specific Draft-Rosen MVPN control packet in Draft-Rosen MVPN configuration
https://notcve.org/view.php?id=CVE-2018-0045
Receipt of a specific Draft-Rosen MVPN control packet may cause the routing protocol daemon (RPD) process to crash and restart or may lead to remote code execution. By continuously sending the same specific Draft-Rosen MVPN control packet, an attacker can repeatedly crash the RPD process causing a prolonged denial of service. This issue may occur when the Junos OS device is configured for Draft-Rosen multicast virtual private network (MVPN). The VPN is multicast-enabled and configured to use Protocol Independent Multicast (PIM) protocol within the VPN. This issue can only be exploited from the PE device within the MPLS domain which is capable of forwarding IP multicast traffic in core. • http://www.securitytracker.com/id/1041848 https://kb.juniper.net/JSA10879 • CWE-20: Improper Input Validation •
CVSS: 5.9EPSS: 0%CPEs: 181EXPL: 0CVE-2018-0031 – Junos OS: Receipt of specially crafted UDP packets over MPLS may bypass stateless IP firewall rules
https://notcve.org/view.php?id=CVE-2018-0031
Receipt of specially crafted UDP/IP packets over MPLS may be able to bypass a stateless firewall filter. The crafted UDP packets must be encapsulated and meet a very specific packet format to be classified in a way that bypasses IP firewall filter rules. The packets themselves do not cause a service interruption (e.g. RPD crash), but receipt of a high rate of UDP packets may be able to contribute to a denial of service attack. This issue only affects processing of transit UDP/IP packets over MPLS, received on an interface with MPLS enabled. • http://www.securitytracker.com/id/1041326 https://kb.juniper.net/JSA10865 • CWE-400: Uncontrolled Resource Consumption •