CVSS: -EPSS: 0%CPEs: 3EXPL: 0CVE-2024-45015 – drm/msm/dpu: move dpu_encoder's connector assignment to atomic_enable()
https://notcve.org/view.php?id=CVE-2024-45015
In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: move dpu_encoder's connector assignment to atomic_enable() For cases where the crtc's connectors_changed was set without enable/active getting toggled , there is an atomic_enable() call followed by an atomic_disable() but without an atomic_mode_set(). This results in a NULL ptr access for the dpu_encoder_get_drm_fmt() call in the atomic_enable() as the dpu_encoder's connector was cleared in the atomic_disable() but not re-assigned as there was no atomic_mode_set() call. Fix the NULL ptr access by moving the assignment for atomic_enable() and also use drm_atomic_get_new_connector_for_encoder() to get the connector from the atomic_state. Patchwork: https://patchwork.freedesktop.org/patch/606729/ • https://git.kernel.org/stable/c/25fdd5933e4c0f5fe2ea5cd59994f8ac5fbe90ef https://git.kernel.org/stable/c/3fb61718bcbe309279205d1cc275a6435611dc77 https://git.kernel.org/stable/c/3bacf814b6a61cc683c68465f175ebd938f09c52 https://git.kernel.org/stable/c/aedf02e46eb549dac8db4821a6b9f0c6bf6e3990 •
CVSS: -EPSS: 0%CPEs: 3EXPL: 0CVE-2024-45012 – nouveau/firmware: use dma non-coherent allocator
https://notcve.org/view.php?id=CVE-2024-45012
In the Linux kernel, the following vulnerability has been resolved: nouveau/firmware: use dma non-coherent allocator Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup, when the iommu is enabled: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? • https://git.kernel.org/stable/c/2541626cfb794e57ba0575a6920826f591f7ced0 https://git.kernel.org/stable/c/cc29c5546c6a373648363ac49781f1d74b530707 https://git.kernel.org/stable/c/57ca481fca97ca4553e8c85d6a94baf4cb40c40e https://git.kernel.org/stable/c/9b340aeb26d50e9a9ec99599e2a39b035fac978e •
CVSS: -EPSS: 0%CPEs: 5EXPL: 0CVE-2024-45011 – char: xillybus: Check USB endpoints when probing device
https://notcve.org/view.php?id=CVE-2024-45011
In the Linux kernel, the following vulnerability has been resolved: char: xillybus: Check USB endpoints when probing device Ensure, as the driver probes the device, that all endpoints that the driver may attempt to access exist and are of the correct type. All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at address 1. This is verified in xillyusb_setup_base_eps(). On top of that, a XillyUSB device may have additional Bulk OUT endpoints. The information about these endpoints' addresses is deduced from a data structure (the IDT) that the driver fetches from the device while probing it. These endpoints are checked in setup_channels(). A XillyUSB device never has more than one IN endpoint, as all data towards the host is multiplexed in this single Bulk IN endpoint. This is why setup_channels() only checks OUT endpoints. • https://git.kernel.org/stable/c/a53d1202aef122894b6e46116a92174a9123db5d https://git.kernel.org/stable/c/25ee8b2908200fc862c0434e5ad483817d50ceda https://git.kernel.org/stable/c/4267131278f5cc98f8db31d035d64bdbbfe18658 https://git.kernel.org/stable/c/5cff754692ad45d5086b75fef8cc3a99c30a1005 https://git.kernel.org/stable/c/1371d32b95972d39c1e6e4bae8b6d0df1b573731 https://git.kernel.org/stable/c/2374bf7558de915edc6ec8cb10ec3291dfab9594 •
CVSS: -EPSS: 0%CPEs: 4EXPL: 0CVE-2024-45010 – mptcp: pm: only mark 'subflow' endp as available
https://notcve.org/view.php?id=CVE-2024-45010
In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only mark 'subflow' endp as available Adding the following warning ... WARN_ON_ONCE(msk->pm.local_addr_used == 0) ... before decrementing the local_addr_used counter helped to find a bug when running the "remove single address" subtest from the mptcp_join.sh selftests. Removing a 'signal' endpoint will trigger the removal of all subflows linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used counter, which is wrong in this case because this counter is linked to 'subflow' endpoints, and here it is a 'signal' endpoint that is being removed. Now, the counter is decremented, only if the ID is being used outside of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and if the ID is not 0 -- local_addr_used is not taking into account these ones. This marking of the ID as being available, and the decrement is done no matter if a subflow using this ID is currently available, because the subflow could have been closed before. • https://git.kernel.org/stable/c/06faa22710342bca5e9c249634199c650799fce6 https://git.kernel.org/stable/c/7fdc870d08960961408a44c569f20f50940e7d4f https://git.kernel.org/stable/c/43cf912b0b0fc7b4fd12cbc735d1f5afb8e1322d https://git.kernel.org/stable/c/9849cfc67383ceb167155186f8f8fe8a896b60b3 https://git.kernel.org/stable/c/322ea3778965da72862cca2a0c50253aacf65fe6 •
CVSS: -EPSS: 0%CPEs: 5EXPL: 0CVE-2024-45009 – mptcp: pm: only decrement add_addr_accepted for MPJ req
https://notcve.org/view.php?id=CVE-2024-45009
In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only decrement add_addr_accepted for MPJ req Adding the following warning ... WARN_ON_ONCE(msk->pm.add_addr_accepted == 0) ... before decrementing the add_addr_accepted counter helped to find a bug when running the "remove single subflow" subtest from the mptcp_join.sh selftest. Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the subflow closure. Before this patch, and upon the reception of the RM_ADDR, the other peer will then try to decrement this add_addr_accepted. That's not correct because the attached subflows have not been created upon the reception of an ADD_ADDR. A way to solve that is to decrement the counter only if the attached subflow was an MP_JOIN to a remote id that was not 0, and initiated by the host receiving the RM_ADDR. • https://git.kernel.org/stable/c/d0876b2284cf8b34dd214b2d0aa21071c345da59 https://git.kernel.org/stable/c/35b31f5549ede4070566b949781e83495906b43d https://git.kernel.org/stable/c/85b866e4c4e63a1d7afb58f1e24273caad03d0b7 https://git.kernel.org/stable/c/d20bf2c96d7ffd171299b32f562f70e5bf5dc608 https://git.kernel.org/stable/c/2060f1efab370b496c4903b840844ecaff324c3c https://git.kernel.org/stable/c/1c1f721375989579e46741f59523e39ec9b2a9bd •