CVSS: 7.1EPSS: 0%CPEs: 9EXPL: 0CVE-2024-38538 – net: bridge: xmit: make sure we have at least eth header len bytes
https://notcve.org/view.php?id=CVE-2024-38538
In the Linux kernel, the following vulnerability has been resolved: net: bridge: xmit: make sure we have at least eth header len bytes syzbot triggered an uninit value[1] error in bridge device's xmit path by sending a short (less than ETH_HLEN bytes) skb. To fix it check if we can actually pull that amount instead of assuming. Tested with dropwatch: drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3) origin: software timestamp: Mon May 13 11:31:53 2024 778214037 nsec protocol: 0x88a8 length: 2 original length: 2 drop reason: PKT_TOO_SMALL [1] BUG: KMSAN: uninit-value in br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x34db/0x5350 net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] __bpf_tx_skb net/core/filter.c:2136 [inline] __bpf_redirect_common net/core/filter.c:2180 [inline] __bpf_redirect+0x14a6/0x1620 net/core/filter.c:2187 ____bpf_clone_redirect net/core/filter.c:2460 [inline] bpf_clone_redirect+0x328/0x470 net/core/filter.c:2432 ___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997 __bpf_prog_run512+0xb5/0xe0 kernel/bpf/core.c:2238 bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline] __bpf_prog_run include/linux/filter.h:657 [inline] bpf_prog_run include/linux/filter.h:664 [inline] bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425 bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058 bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5678 __do_sys_bpf kernel/bpf/syscall.c:5767 [inline] __se_sys_bpf kernel/bpf/syscall.c:5765 [inline] __x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765 x64_sys_call+0x96b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f En el kernel de Linux, se resolvió la siguiente vulnerabilidad: net: bridge: xmit: asegúrese de tener al menos el encabezado eth len bytes syzbot desencadenó un error de valor uninit[1] en la ruta xmit del dispositivo puente al enviar un mensaje corto (menos de ETH_HLEN bytes) skb. Para solucionarlo, compruebe si realmente podemos retirar esa cantidad en lugar de suponerla. Probado con dropwatch: soltar en: br_dev_xmit+0xb93/0x12d0 [puente] (0xffffffffc06739b3) origen: marca de tiempo del software: lunes 13 de mayo 11:31:53 2024 778214037 protocolo nsec: 0x88a8 longitud: 2 longitud original: 2 motivo de caída: PKT_TOO_SMALL [1 ] ERROR: KMSAN: valor uninit en br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 __netdev_start_xmit include/linux/netdevice.h:4903 [en línea] netdev_start_xmit include/linux/netdevice.h:4917 [en línea] xmit_one net/core/dev.c:3531 [en línea] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x34db/0x5350 net/core/dev .c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [en línea] __bpf_tx_skb net/core/filter.c:2136 [en línea] __bpf_redirect_common net/core/filter.c:2180 [en línea] __bpf_redirect+0x14a6/0x1620 net/ Core/Filter.C: 2187 ____BPF_CLONE_REDIRECT NET/CORE/FILTRO.C: 2460 [Inline] BPF_CLONE_REDIRECT+0x328/0x470 NET/Core/Filter.c: 2432 ___ BPF_PROG_RUN+0X13FE/0XE0F0 KERNEL/BPF/BPF/CORE. 0xb5/0xe0 kernel/bpf/core.c:2238 bpf_dispatcher_nop_func include/linux/bpf.h:1234 [en línea] __bpf_prog_run include/linux/filter.h:657 [en línea] bpf_prog_run include/linux/filter.h:664 [en línea ] bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425 bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058 bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269 pf+0x6aa/0xd90 núcleo/ bpf/syscall.c:5678 __do_sys_bpf kernel/bpf/syscall.c:5767 [en línea] __se_sys_bpf kernel/bpf/syscall.c:5765 [en línea] __x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765 ys_call+0x96b /0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [en línea] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 Entry_SYSCALL_64_after_hwframe+ 0x77/0x7f • https://git.kernel.org/stable/c/1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 https://git.kernel.org/stable/c/3e01fc3c66e65d9afe98f1489047a1b2dd8741ca https://git.kernel.org/stable/c/b2b7c43cd32080221bb233741bd6011983fe7c11 https://git.kernel.org/stable/c/82090f94c723dab724b1c32db406091d40448a17 https://git.kernel.org/stable/c/c964429ef53f42098a6545a5dabeb1441c1e821d https://git.kernel.org/stable/c/28126b83f86ab9cc7936029c2dff845d3dcedba2 https://git.kernel.org/stable/c/1abb371147905ba250b4cc0230c4be7e90bea4d5 https://git.kernel.org/stable/c/f482fd4ce919836a49012b2d31b00fc36 • CWE-99: Improper Control of Resource Identifiers ('Resource Injection') •
CVSS: 7.8EPSS: 0%CPEs: 8EXPL: 0CVE-2024-36971 – Android Kernel Remote Code Execution Vulnerability
https://notcve.org/view.php?id=CVE-2024-36971
In the Linux kernel, the following vulnerability has been resolved: net: fix __dst_negative_advice() race __dst_negative_advice() does not enforce proper RCU rules when sk->dst_cache must be cleared, leading to possible UAF. RCU rules are that we must first clear sk->sk_dst_cache, then call dst_release(old_dst). Note that sk_dst_reset(sk) is implementing this protocol correctly, while __dst_negative_advice() uses the wrong order. Given that ip6_negative_advice() has special logic against RTF_CACHE, this means each of the three ->negative_advice() existing methods must perform the sk_dst_reset() themselves. Note the check against NULL dst is centralized in __dst_negative_advice(), there is no need to duplicate it in various callbacks. Many thanks to Clement Lecigne for tracking this issue. This old bug became visible after the blamed commit, using UDP sockets. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: net: fix __dst_negative_advice() race __dst_negative_advice() no aplica las reglas adecuadas de RCU cuando se debe borrar sk->dst_cache, lo que genera una posible UAF. Las reglas de RCU son que primero debemos borrar sk->sk_dst_cache y luego llamar a dst_release(old_dst). Tenga en cuenta que sk_dst_reset(sk) implementa este protocolo correctamente, mientras que __dst_negative_advice() utiliza el orden incorrecto. Dado que ip6_negative_advice() tiene una lógica especial contra RTF_CACHE, esto significa que cada uno de los tres ->negative_advice() métodos existentes debe realizar sk_dst_reset() ellos mismos. • https://git.kernel.org/stable/c/a87cb3e48ee86d29868d3f59cfb9ce1a8fa63314 https://git.kernel.org/stable/c/051c0bde9f0450a2ec3d62a86d2a0d2fad117f13 https://git.kernel.org/stable/c/db0082825037794c5dba9959c9de13ca34cc5e72 https://git.kernel.org/stable/c/2295a7ef5c8c49241bff769e7826ef2582e532a6 https://git.kernel.org/stable/c/eacb8b195579c174a6d3e12a9690b206eb7f28cf https://git.kernel.org/stable/c/81dd3c82a456b0015461754be7cb2693991421b4 https://git.kernel.org/stable/c/5af198c387128a9d2ddd620b0f0803564a4d4508 https://git.kernel.org/stable/c/b8af8e6118a6605f0e495a58d591ca94a • CWE-416: Use After Free •
CVSS: 5.5EPSS: 0%CPEs: 6EXPL: 0CVE-2024-36969 – drm/amd/display: Fix division by zero in setup_dsc_config
https://notcve.org/view.php?id=CVE-2024-36969
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix division by zero in setup_dsc_config When slice_height is 0, the division by slice_height in the calculation of the number of slices will cause a division by zero driver crash. This leaves the kernel in a state that requires a reboot. This patch adds a check to avoid the division by zero. The stack trace below is for the 6.8.4 Kernel. I reproduced the issue on a Z16 Gen 2 Lenovo Thinkpad with a Apple Studio Display monitor connected via Thunderbolt. The amdgpu driver crashed with this exception when I rebooted the system with the monitor connected. kernel: ? • https://git.kernel.org/stable/c/a32c8f951c8a456c1c251e1dcdf21787f8066445 https://git.kernel.org/stable/c/91402e0e5de9124a3108db7a14163fcf9a6d322f https://git.kernel.org/stable/c/7e4f50dfc98c49b3dc6875a35c3112522fb25639 https://git.kernel.org/stable/c/f187fcbbb8f8bf10c6687f0beae22509369f7563 https://git.kernel.org/stable/c/308de6be0c9c7ba36915c0d398e771725c0ea911 https://git.kernel.org/stable/c/130afc8a886183a94cf6eab7d24f300014ff87ba • CWE-369: Divide By Zero •
CVSS: 6.5EPSS: 0%CPEs: 5EXPL: 0CVE-2024-36968 – Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
https://notcve.org/view.php?id=CVE-2024-36968
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: Bluetooth: L2CAP: corrige div-by-zero en l2cap_le_flowctl_init() l2cap_le_flowctl_init() puede causar tanto div-by-zero como un desbordamiento de enteros ya que hdev->le_mtu puede no caer el rango válido. Mueva MTU de hci_dev a hci_conn para validar MTU y detener el proceso de conexión antes si MTU no es válido. Además, agregue una validación faltante en read_buffer_size() y haga que devuelva un valor de error si la validación falla. Ahora hci_conn_add() devuelve ERR_PTR() ya que puede fallar debido a una falla de kzalloc y un valor de MTU no válido. error de división: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: GW 6.9.0-rc5+ #20 Nombre de hardware: PC estándar QEMU (i440FX + PIIX, 1996), BIOS 1.15.0-1 01/04/2014 Cola de trabajo: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Código: e8 17 17 0c 00 66 41 89 9f 84 00 00 novio 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12 : ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:00000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 50033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Seguimiento de llamadas: l2cap_le_connect_req net /bluetooth/l2cap_core.c:4902 [en línea] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [en línea] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [en línea] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c: 6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [en línea] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 Process_one_work kernel/workqueue.c: 3254 [en línea] Process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 trabajador_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/ Process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Módulos vinculados en: ---[ end trace 0000000000000000 ]--- • https://git.kernel.org/stable/c/6ed58ec520ad2b2fe3f955c8a5fd0eecafccebdf https://git.kernel.org/stable/c/ad3f7986c5a0f82b8b66a0afe1cc1f5421e1d674 https://git.kernel.org/stable/c/dfece2b4e3759759b2bdfac2cd6d0ee9fbf055f3 https://git.kernel.org/stable/c/d2b2f7d3936dc5990549bc36ab7ac7ac37f22c30 https://git.kernel.org/stable/c/4d3dbaa252257d20611c3647290e6171f1bbd6c8 https://git.kernel.org/stable/c/a5b862c6a221459d54e494e88965b48dcfa6cc44 • CWE-190: Integer Overflow or Wraparound CWE-369: Divide By Zero •
CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2024-36964 – fs/9p: only translate RWX permissions for plain 9P2000
https://notcve.org/view.php?id=CVE-2024-36964
In the Linux kernel, the following vulnerability has been resolved: fs/9p: only translate RWX permissions for plain 9P2000 Garbage in plain 9P2000's perm bits is allowed through, which causes it to be able to set (among others) the suid bit. This was presumably not the intent since the unix extended bits are handled explicitly and conditionally on .u. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: fs/9p: solo traduce permisos RWX para 9P2000 simple. Se permite el paso de basura en bits permanentes de 9P2000 simple, lo que hace que pueda establecer (entre otros) el bit suid. Probablemente esta no era la intención, ya que los bits extendidos de Unix se manejan explícita y condicionalmente en .u. • https://git.kernel.org/stable/c/e90bc596a74bb905e0a45bf346038c3f9d1e868d https://git.kernel.org/stable/c/df1962a199783ecd66734d563caf0fedecf08f96 https://git.kernel.org/stable/c/5a605930e19f451294bd838754f7d66c976a8a2c https://git.kernel.org/stable/c/ad4f65328661392de74e3608bb736fedf3b67e32 https://git.kernel.org/stable/c/ca9b5c81f0c918c63d73d962ed8a8e231f840bc8 https://git.kernel.org/stable/c/e55c601af3b1223a84f9f27f9cdbd2af5e203bf3 https://git.kernel.org/stable/c/157d468e34fdd3cb1ddc07c2be32fb3b02826b02 https://git.kernel.org/stable/c/cd25e15e57e68a6b18dc9323047fe9c68 •