Page 325 of 3185 results (0.008 seconds)

CVSS: 8.4EPSS: 0%CPEs: 4EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: can: j1939: fix Use-after-Free, hold skb ref while in use This patch fixes a Use-after-Free found by the syzbot. The problem is that a skb is taken from the per-session skb queue, without incrementing the ref count. This leads to a Use-after-Free if the skb is taken concurrently from the session queue due to a CTS. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: can: j1939: corrige Use-after-Free, mantenga presionada la referencia skb mientras está en uso. Este parche corrige un Use-after-Free encontrado por syzbot. El problema es que se toma un skb de la cola de skb por sesión, sin incrementar el recuento de referencias. • https://git.kernel.org/stable/c/9d71dd0c70099914fcd063135da3c580865e924c https://git.kernel.org/stable/c/22cba878abf646cd3a02ee7c8c2cef7afe66a256 https://git.kernel.org/stable/c/509ab6bfdd0c76daebbad0f0af07da712116de22 https://git.kernel.org/stable/c/1071065eeb33d32b7d98c2ce7591881ae7381705 https://git.kernel.org/stable/c/2030043e616cab40f510299f09b636285e0a3678 • CWE-416: Use After Free •

CVSS: 5.5EPSS: 0%CPEs: 6EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: fix memory leak in mcba_usb Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS Analyzer Tool. The problem was in unfreed usb_coherent. In mcba_usb_start() 20 coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see mcba_usb_start) and this flag cannot be used with coherent buffers. Fail log: | [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected | [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem) So, all allocated buffers should be freed with usb_free_coherent() explicitly NOTE: The same pattern for allocating and freeing coherent buffers is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c En el kernel de Linux, se resolvió la siguiente vulnerabilidad: can: mcba_usb: repara la pérdida de memoria en mcba_usb. Syzbot informó una pérdida de memoria en el controlador SocketCAN para la herramienta Microchip CAN BUS Analyzer. El problema estaba en usb_coherent no liberado. En mcba_usb_start() se asignan 20 buffers coherentes y no hay nada que los libere: 1) En la función de devolución de llamada, la urb se vuelve a enviar y eso es todo 2) En la función de desconexión, las urbs simplemente se eliminan, pero URB_FREE_BUFFER no está configurado (ver mcba_usb_start) y Esta bandera no se puede utilizar con buffers coherentes. • https://git.kernel.org/stable/c/51f3baad7de943780ce0c17bd7975df567dd6e14 https://git.kernel.org/stable/c/89df95ce32be204eef2e7d4b2f6fb552fb191a68 https://git.kernel.org/stable/c/a115198caaab6d663bef75823a3c5f0802306d60 https://git.kernel.org/stable/c/6f87c0e21ad20dd3d22108e33db1c552dfa352a0 https://git.kernel.org/stable/c/6bd3d80d1f019cefa7011056c54b323f1d8b8e83 https://git.kernel.org/stable/c/d0760a4ef85697bc756d06eae17ae27f3f055401 https://git.kernel.org/stable/c/91c02557174be7f72e46ed7311e3bea1939840b0 •

CVSS: 6.6EPSS: 0%CPEs: 4EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Immediately reset the MMU context when the SMM flag is cleared Immediately reset the MMU context when the vCPU's SMM flag is cleared so that the SMM flag in the MMU role is always synchronized with the vCPU's flag. If RSM fails (which isn't correctly emulated), KVM will bail without calling post_leave_smm() and leave the MMU in a bad state. The bad MMU role can lead to a NULL pointer dereference when grabbing a shadow page's rmap for a page fault as the initial lookups for the gfn will happen with the vCPU's SMM flag (=0), whereas the rmap lookup will use the shadow page's SMM flag, which comes from the MMU (=1). SMM has an entirely different set of memslots, and so the initial lookup can find a memslot (SMM=0) and then explode on the rmap memslot lookup (SMM=1). general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 8410 Comm: syz-executor382 Not tainted 5.13.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__gfn_to_rmap arch/x86/kvm/mmu/mmu.c:935 [inline] RIP: 0010:gfn_to_rmap+0x2b0/0x4d0 arch/x86/kvm/mmu/mmu.c:947 Code: <42> 80 3c 20 00 74 08 4c 89 ff e8 f1 79 a9 00 4c 89 fb 4d 8b 37 44 RSP: 0018:ffffc90000ffef98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888015b9f414 RCX: ffff888019669c40 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 0000000000000001 R08: ffffffff811d9cdb R09: ffffed10065a6002 R10: ffffed10065a6002 R11: 0000000000000000 R12: dffffc0000000000 R13: 0000000000000003 R14: 0000000000000001 R15: 0000000000000000 FS: 000000000124b300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000028e31000 CR4: 00000000001526e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rmap_add arch/x86/kvm/mmu/mmu.c:965 [inline] mmu_set_spte+0x862/0xe60 arch/x86/kvm/mmu/mmu.c:2604 __direct_map arch/x86/kvm/mmu/mmu.c:2862 [inline] direct_page_fault+0x1f74/0x2b70 arch/x86/kvm/mmu/mmu.c:3769 kvm_mmu_do_page_fault arch/x86/kvm/mmu.h:124 [inline] kvm_mmu_page_fault+0x199/0x1440 arch/x86/kvm/mmu/mmu.c:5065 vmx_handle_exit+0x26/0x160 arch/x86/kvm/vmx/vmx.c:6122 vcpu_enter_guest+0x3bdd/0x9630 arch/x86/kvm/x86.c:9428 vcpu_run+0x416/0xc20 arch/x86/kvm/x86.c:9494 kvm_arch_vcpu_ioctl_run+0x4e8/0xa40 arch/x86/kvm/x86.c:9722 kvm_vcpu_ioctl+0x70f/0xbb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3460 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:1069 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:1055 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x440ce9 En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: KVM: x86: restablece inmediatamente el contexto de MMU cuando se borra el indicador SMM Restablece inmediatamente el contexto de MMU cuando se borra el indicador SMM de la vCPU para que el indicador SMM en la función MMU esté siempre sincronizado con el indicador de la vCPU. Si RSM falla (que no se emula correctamente), KVM se retirará sin llamar a post_leave_smm() y dejará la MMU en mal estado. • https://git.kernel.org/stable/c/9ec19493fb86d6d5fbf9286b94ff21e56ef66376 https://git.kernel.org/stable/c/cbb425f62df9df7abee4b3f068f7ed6ffc3561e2 https://git.kernel.org/stable/c/669a8866e468fd020d34eb00e08cb41d3774b71b https://git.kernel.org/stable/c/df9a40cfb3be2cbeb1c17bb67c59251ba16630f3 https://git.kernel.org/stable/c/78fcb2c91adfec8ce3a2ba6b4d0dda89f2f4a7c6 • CWE-476: NULL Pointer Dereference •

CVSS: -EPSS: 0%CPEs: 6EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: PCI: aardvark: Fix kernel panic during PIO transfer Trying to start a new PIO transfer by writing value 0 in PIO_START register when previous transfer has not yet completed (which is indicated by value 1 in PIO_START) causes an External Abort on CPU, which results in kernel panic: SError Interrupt on CPU0, code 0xbf000002 -- SError Kernel panic - not syncing: Asynchronous SError Interrupt To prevent kernel panic, it is required to reject a new PIO transfer when previous one has not finished yet. If previous PIO transfer is not finished yet, the kernel may issue a new PIO request only if the previous PIO transfer timed out. In the past the root cause of this issue was incorrectly identified (as it often happens during link retraining or after link down event) and special hack was implemented in Trusted Firmware to catch all SError events in EL3, to ignore errors with code 0xbf000002 and not forwarding any other errors to kernel and instead throw panic from EL3 Trusted Firmware handler. Links to discussion and patches about this issue: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50 https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/ https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/ https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541 But the real cause was the fact that during link retraining or after link down event the PIO transfer may take longer time, up to the 1.44s until it times out. This increased probability that a new PIO transfer would be issued by kernel while previous one has not finished yet. After applying this change into the kernel, it is possible to revert the mentioned TF-A hack and SError events do not have to be caught in TF-A EL3. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: PCI: aardvark: solucionó el pánico del kernel durante la transferencia de PIO. Intentar iniciar una nueva transferencia de PIO escribiendo el valor 0 en el registro PIO_START cuando la transferencia anterior aún no se ha completado (que se indica con el valor 1). en PIO_START) provoca un aborto externo en la CPU, lo que resulta en pánico del kernel: Interrupción de SError en CPU0, código 0xbf000002 - Pánico del kernel de SError - no se sincroniza: Interrupción de SError asincrónica Para evitar el pánico del kernel, es necesario rechazar una nueva transferencia de PIO cuando el anterior aún no ha terminado. • https://git.kernel.org/stable/c/400e6b1860c8be61388d0b77814c53260f96e17a https://git.kernel.org/stable/c/b00a9aaa4be20ad6e3311fb78a485eae0899e89a https://git.kernel.org/stable/c/4c90f90a91d75c3c73dd633827c90e8746d9f54d https://git.kernel.org/stable/c/1a1dbc4473974867fe8c5f195c17b341c8e82867 https://git.kernel.org/stable/c/3d213a4ddf49a860be6e795482c17f87e0c82b2a https://git.kernel.org/stable/c/f18139966d072dab8e4398c95ce955a9742e04f7 •

CVSS: 6.2EPSS: 0%CPEs: 3EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: x86/ioremap: Map EFI-reserved memory as encrypted for SEV Some drivers require memory that is marked as EFI boot services data. In order for this memory to not be re-used by the kernel after ExitBootServices(), efi_mem_reserve() is used to preserve it by inserting a new EFI memory descriptor and marking it with the EFI_MEMORY_RUNTIME attribute. Under SEV, memory marked with the EFI_MEMORY_RUNTIME attribute needs to be mapped encrypted by Linux, otherwise the kernel might crash at boot like below: EFI Variables Facility v0.08 2004-May-17 general protection fault, probably for non-canonical address 0x3597688770a868b2: 0000 [#1] SMP NOPTI CPU: 13 PID: 1 Comm: swapper/0 Not tainted 5.12.4-2-default #1 openSUSE Tumbleweed Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:efi_mokvar_entry_next [...] Call Trace: efi_mokvar_sysfs_init ? efi_mokvar_table_init do_one_initcall ? __kmalloc kernel_init_freeable ? rest_init kernel_init ret_from_fork Expand the __ioremap_check_other() function to additionally check for this other type of boot data reserved at runtime and indicate that it should be mapped encrypted for an SEV guest. [ bp: Massage commit message. ] En el kernel de Linux, se resolvió la siguiente vulnerabilidad: x86/ioremap: asigne la memoria reservada de EFI como cifrada para SEV. • https://git.kernel.org/stable/c/58c909022a5a56cd1d9e89c8c5461fd1f6a27bb5 https://git.kernel.org/stable/c/208bb686e7fa7fff16e8fa78ff0db34aa9acdbd7 https://git.kernel.org/stable/c/b7a05aba39f733ec337c5b952e112dd2dc4fc404 https://git.kernel.org/stable/c/8d651ee9c71bb12fc0c8eb2786b66cbe5aa3e43b •